Vickers | VQM22525S090090A00200AAAAEAVR00A032
VQM22525S090090A00200AAAAEAVR00A032
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The VQM22525S090090A00200AAAAEAVR00A032 pump is manufactured by Vickers as part of the Vane Pumps series and supplies hydraulic flow for automated machinery. It employs a standard double configuration so two pumping elements operate from a single drive shaft. The front section delivers 90 cm³ per revolution, supporting moderate flow rates at typical industrial speeds. A front frame size of 25 matches common mounting footprints in mobile and stationary equipment. The front mounting flange follows SAE J744 101-2 (SAE B), enabling direct coupling to standard motor adapters. The front outlet port sits opposite the inlet, and both connections use SAE J518 four-bolt flanges to simplify rigid pipe installation. Drive torque is passed through an SAE J744 splined input shaft, and the rotor turns right-hand (clockwise) when viewed from the shaft end.
Design code 32 identifies the internal build revision and material selection for this model. The rear pumping element also provides 90 cm³ per revolution to supply a secondary circuit with equal capacity. It shares a rear frame size of 25, allowing common mounting bolts and spacing across both stages. The rear outlet connection is an SAE J518 four-bolt flange, matching the fittings used on the front group. This rear outlet is located opposite the inlet to maintain mirrored piping paths and balanced manifold stresses. A single shaft seal is installed at the drive end to prevent oil leakage along the spline. All dynamic sealing elements are made from Viton to tolerate higher temperatures and aggressive hydraulic fluids.
Technical Specifications
Design Code
32
Front Displacement
90 cm3/rev
Front Frame Size
25
Front Mounting Flange
SAE J744 101-2 (SAE B)
Front Outlet Port Position
Opposite Inlet Port
Front Outlet Port Type
SAE J518 4-Bolt Flange
Inlet Port Type
SAE J518 4-Bolt Flange
Input Shaft Type
SAE J744 Splined
Pump Configuration
Standard Double
Rear Displacement
90 cm3/rev
Rear Frame Size
25
Rear Outlet Port Position
Opposite Inlet Port
Rear Outlet Port Type
SAE J518 4-Bolt Flange
Rotation (shaft-end View)
Right-Hand (CW)
Seal Type
Viton
Shaft Seal
Single
1620 Old Apex Road
Shipping & Payment Options
