Vickers | VMQ135S135B00500BBDANR00A032
VMQ135S135B00500BBDANR00A032
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The VMQ135S135B00500BBDANR00A032 is a single vane pump built by Vickers within the Vane Pumps series, intended to supply hydraulic power in automated machinery. Its design code 32 establishes the internal configuration used for service alignment, while a displacement of 135.0 cm³ per revolution provides a predictable flow rate for large cylinders and motors. Frame size 35 positions the unit in a mid-range footprint suitable for general industrial equipment. Identified as a single arrangement, the pump encloses one cartridge only. Right-hand rotation orients the drive clockwise to match standard engine outputs. A 38.10 mm keyed input shaft following SAE J744 ensures rigid torque transfer, and the SAE C 2-bolt front mounting flange attaches directly to compatible power-take-off pads.
An ISO 6162 4-bolt split flange on the inlet side resists high suction loads, and the outlet uses the same ISO 6162 4-bolt pattern to maintain pressure integrity. Outlet flow leaves the housing 90° clockwise from the inlet when viewed from the cover end, minimizing elbow fittings in tight installations. The absence of an output shaft coupling prevents thru-drive operation, and rear mounting is also omitted to keep the package short. Buna-N seals allow use with common petroleum-based fluids, while a single primary shaft seal controls external leakage with a simple construction. No special features are listed, so the pump follows the standard VMQ build for routine hydraulic service.
Technical Specifications
Design Code
32
Displacement
135.0 cm³/rev (8.24 in³/rev)
Frame Size
35
Front Mounting Flange
SAE C 2-Bolt
Inlet Port Type
ISO 6162 4-Bolt Split Flange
Input Shaft Type
SAE J744 Keyed (38.10 mm)
Outlet Port Position
90° CW To Inlet (Cover End View)
Outlet Port Type
ISO 6162 4-Bolt Flange
Output Shaft Coupling
None (Non Thru-Drive)
Pump Type
Single
Rear Mounting
None (Non Thru-Drive)
Rotation
Right-Hand (CW)
Seal Material
Buna-N
Shaft Seal
Single, Primary
Special Features
None
1620 Old Apex Road
Shipping & Payment Options
