Vickers | V20F-1P6P-38B5G-22
V20F 1P6P 38B5G 22
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V20F 1P6P 38B5G 22 vane pump is produced by Vickers and belongs to the Vane Pumps series, where it provides positive-displacement flow for hydraulic automation loops. Right-hand rotation matches common engine and motor drive directions, and a SAE rated capacity of 6 US gpm at 1200 rpm and 100 psi defines its baseline delivery. A 1.25 in NPT inlet port connects to standard suction hose, while the pressure port uses a 0.750-16 UNF O-ring boss to maintain a sealed high-pressure joint. The unit includes a 0.50 in NPT tank port so excess fluid can return to reservoir without restriction. With the outlet positioned 90 ° counterclockwise from the inlet, routing of pressure and return lines is simplified in compact manifolds. A built-in relief valve is preset to 121 bar (1750 psi) to protect downstream components from overload.
The flow control and relief cover regulates discharge volume and opens when system pressure exceeds the internal setting to stabilize circuit flow. A No. 5 orifice measuring 0.147 in in that cover meters bypass fluid for precise trimming of actuator speed. Sealed bearings keep grease contained and exclude contaminants, extending service life in dirty environments. A single-lip shaft seal blocks oil from escaping along the drive shaft and prevents air ingress during suction strokes. The 11-tooth 16/32 DP 30 ° shaft spline mates with standard hydraulic couplings, and the 0.590 in minor diameter ensures correct hub engagement. A 2-bolt SAE A flange enables quick, rigid mounting to power units or gearboxes, completing the mechanical interface of this pump.
Technical Specifications
Bearing Type
Sealed
Cover Orifice
No. 5 (0.147 in)
Cover Type
Flow Control & Relief
Inlet Port
1.25 in NPT
Mounting Type
2-Bolt Flange (SAE A)
Outlet Position
90° CCW From Inlet
Pressure Port
.750-16 UNF (O-Ring Boss)
Relief Valve Setting
121 bar (1750 psi)
Rotation
Right-Hand
Sae Rated Capacity
6 USgpm @1200 rpm (100 psi)
Shaft Minor Diameter
0.590 in
Shaft Seal
Single Lip
Shaft Spline
11T 16/32 DP 30°
Tank Port
0.50 in NPT
1620 Old Apex Road
Shipping & Payment Options
