V20106F13S2S80CD12092

The V20106F13S2S80CD12092 vane pump is produced by Vickers within the Vane Pumps series and supplies hydraulic flow for automation circuits. It mounts by means of a 2-bolt flange on an SAE A pad, allowing direct connection to a motor or adapter plate. Hydraulic oil enters through a 1.50 in four-bolt flange inlet, which keeps the suction passage rigid and limits turbulence. At the shaft end the unit delivers 13 US gpm when driven at 1200 rpm with a 100 psi pressure drop, providing the main volume for actuators. Continuous operation is rated to 172 bar (2500 psi), and discharge from this section exits through an outlet threaded 1.0625-12 UN-2B for compatibility with standard straight-thread fittings.

For pilot or auxiliary functions the cover end supplies 2 US gpm at the same 1200 rpm and 100 psi, offering a low-flow source independent of the main circuit. This secondary flow is routed through a port cut with a 0.750-16 UNF-2B thread so it can be piped separately. Overall length, height, and width are 236.0 mm, 215.1 mm, and 121.7 mm, which helps the pump fit into compact power units. The limited envelope shortens plumbing runs and reduces pressure loss in tight machine frames. These dimensions, combined with the dual-flow capability, support multifunction hydraulic assemblies that need both high and low flows within restricted spaces.