Vickers | V10NF-1S5T-38D4H-20
V10NF 1S5T 38D4H 20
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V10NF 1S5T 38D4H 20 vane pump is manufactured by Vickers as part of the Vane Pumps series and supplies hydraulic flow in automation systems. A cast iron housing provides strength against mechanical stress and abrasion. The pump measures 6.3 in in length, 5.12 in in width, and 4.35 in in height, so it fits into compact power units. Its weight of 15 lb permits handling without lifting equipment during service work. A 2-bolt flange mounting style aligns the shaft and maintains rigid support on motor adapters. The inlet port uses a 1-5/16-12 SAE thread, allowing connection with standard suction fittings. The outlet port is located 90° counter-clockwise from the inlet, a layout that helps route pressure lines away from the motor frame and reduces hose bends.
The pump sustains working pressures up to 172 bar (2500 psi) to support medium-duty circuits such as clamp, feed, or positioning actuators. Suction conditions must remain below 0.7 bar (10 psi) positive pressure and within a 5 in Hg vacuum limit to prevent cavitation. At 1200 rpm and 7 bar, the unit delivers a typical flow of 13.6 L/min (3.6 US gpm), matching the needs of single-acting cylinders or small manifolds. Maximum operating points draw 5.2 kW (7 hp), so drive motors can be sized accordingly. Buna-N shaft seals guard against hydraulic fluid leakage and tolerate common petroleum-based oils used in factory equipment.
Technical Specifications
Height
4.35 in
Housing Material
Cast Iron
Inlet Port Thread
1-5/16-12 (SAE)
Inlet Positive Pressure
0.7 bar (10 psi) (max)
Inlet Vacuum Limit
5 in Hg (max)
Input Power At Max Conditions
5.2 kW (7 hp)
Length
6.3 in
Maximum Pressure
172 bar (2500 psi)
Mounting Type
2-Bolt Flange
Outlet Port Position
90° CCW From Inlet
Seal Material
Buna-N
Typical Delivery (1200 Rpm, 7 Bar)
13.6 L/min (3.6 USgpm)
Weight
15 lb
Width
5.12 in
1620 Old Apex Road
Shipping & Payment Options
