Vickers | DGMFN5XB2W30
DGMFN5XB2W30
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DGMFN5XB2W30 valve is part of the SystemStak Modular Valves series manufactured by Vickers for hydraulic automation where precise metering into an actuator is required. Flow is adjusted by a screw with locknut, and the hex head accepts a 4 mm (5/32 in) key for repeatable setting. The adjustment range is classified as normal control, suitable for general duty circuits. Flow enters the valve in a meter-in direction, and non-compensated metering means the orifice opening alone dictates rate without pressure correction. The design acts on the B cylinder port so users can tune extension speed independently. It handles up to 315 bar (4500 psi) and passes as much as 120 L/min (32 US gpm) without exceeding rated limits. Connection is through the ISO 4401-AC-05-4-A (NFPA D05) interface to match common sub-plates.
The modular body measures 139 mm (5.47 in) long, 71.6 mm (2.82 in) wide, and 50.0 mm (1.97 in) high, allowing it to fit within standard stack heights. Mass is 3.1 kg (7 lb), so a single technician can position it during assembly. Four mounting holes secure the unit to the manifold and maintain seal compression. An integral reverse-flow check permits unrestricted return flow while maintaining controlled meter-in operation in the opposite direction. Viton seals resist hydraulic oil and elevated temperature, supporting long service life. These physical and functional features give the DGMFN5XB2W30 consistent performance inside compact hydraulic manifolds that rely on modular stacking.
Technical Specifications
Adjuster Hex Size
4 mm (5/32 in)
Adjustment Device
Screw With Locknut
Adjustment Range
Normal Control
Direction Of Flow
Meter-In
Height
50.0 mm (1.97 in)
Interface
ISO 4401-AC-05-4-A (NFPA D05)
Length
139 mm (5.47 in)
Mass
3.1 kg (7 lb)
Maximum Flow
120 L/min (32 USgpm)
Maximum Operating Pressure
315 bar (4500 psi)
Metering Type
Non-Compensated
Mounting Holes
4
Port Operated Upon
B Cylinder Port
Reverse Flow Check
Integral
Seal Material
Viton
Width
71.6 mm (2.82 in)
1620 Old Apex Road
Shipping & Payment Options
