Vickers | PVQ40AR02AA10H211100A100100CD0A
PVQ40AR02AA10H211100A100100CD0A
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVQ40AR02AA10H211100A100100CD0A piston pump belongs to the PVQ Piston Pumps series and is manufactured by Vickers. It supplies hydraulic circuits with a displacement of 41.0 cm³ per revolution, so each shaft turn delivers a fixed volume for predictable actuator motion. The unit operates at a rated speed of 1800 r/min, matching common industrial motor drives used in automation. Right-hand clockwise rotation aligns with standard engine coupling, minimizing alignment changes in retrofit projects. An adjustable pressure and flow controller lets maintenance staff tune system response without replacing components. The pump withstands continuous pressures up to 210 bar (3000 psi), providing sufficient force for medium-duty cylinders and motors, while a maximum input power of 27.6 kW (37 hp) defines the electric or engine capacity required to drive it. Side ports simplify manifold connections in compact power units, and an SAE J744 101-2 mounting flange allows direct installation on B-size motor adapters.
A fluorocarbon shaft seal protects the drive end from fluid leakage and supports operation with higher oil temperatures. The suction line attaches with a 1.875-12 UN-2B O-ring thread, giving a large inlet area to reduce cavitation, whereas the pressure outlet uses a 1.3125-12 UN-2B O-ring thread to maintain tight sealing under full load. Internal case drainage is routed through a top D1 port, with the bottom D2 port plugged to simplify vertical mounting; the drain connection size of 0.875-14 UNF-2B accommodates standard hose fittings. No dedicated diagnostic pressure port is provided, so external test points must be installed in the circuit when monitoring is required. Total pump mass is 20.6 kg (45.4 lb), light enough for single-technician handling during maintenance yet heavy enough to damp vibration.
Technical Specifications
Approximate Weight
20.6 kg (45.4 lb)
Controller Type
Adjustable Pressure And Flow
Diagnostic Pressure Port
None
Displacement
41.0 cm3/rev (2.50 in3/rev)
Drain Port Location
Top (D1), Bottom Plugged (D2)
Drain Port Size
0.875-14 UNF-2B O-Ring
Max Input Power @ Rated
27.6 kW (37 hp)
Max Operating Pressure
210 bar (3000 psi)
Mounting Flange
SAE J744 101-2 (SAE B)
Port Location
Side Ports
Pressure Port Thread
1.3125-12 UN-2B O-Ring
Rated Speed
1800 r/min
Rotation
Right-Hand (CW)
Shaft Seal
Fluorocarbon
Suction Port Thread
1.875-12 UN-2B O-Ring
1620 Old Apex Road
Shipping & Payment Options
