Vickers | PVQ40AR02AA10G21000001AE100CD0
PVQ40AR02AA10G21000001AE100CD0
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVQ40AR02AA10G21000001AE100CD0 piston pump is produced by Vickers and belongs to the PVQ Piston Pumps series. Intended for hydraulic automation, it employs an adjustable pressure compensator control so flow decreases automatically when system pressure reaches the set point. A geometric displacement of 41.0 cm³ per revolution defines the swept volume and helps predict flow at any speed. At 1800 r/min the unit supplies 73.8 L/min, giving adequate delivery for medium-size circuits. Right-hand (clockwise) rotation matches common electric-motor drives. A 25.4 mm keyed shaft under SAE J744-25-1 provides mechanical coupling, while the 2-bolt B-B mounting pattern specified in SAE J744-101-2 positions the housing on standard pump pads. The pressure port uses a 1.3125-12 UN-2B thread in accordance with SAE J514 to connect discharge lines without adapters.
The pump runs continuously at a rated speed of 1800 r/min, and its rated pressure of 210 bar is safeguarded by a compensator setting fixed at the same 210 bar to prevent over-pressurization. Case pressure must not exceed 0.35 bar, so the drain line needs unrestricted flow back to tank. Inlet conditions allow up to 2 bar positive pressure or a maximum vacuum of 5 in Hg, supporting either flooded or suction feed arrangements. The suction port thread is 1.875-12 UN-2B per SAE J514, providing a large bore for low intake velocity. Dynamic response is precise, with the swashplate reaching full displacement in 0.050 s during onstroke and returning to neutral in 0.020 s during offstroke, enabling rapid flow changes when loads shift.
Technical Specifications
Case Pressure (max)
0.35 bar
Compensator Setting
210 bar
Control Type
Adjustable Pressure Compensator
Front Mounting
2-Bolt B-B (SAE J744-101-2)
Geometric Displacement
41.0 cm³/rev
Inlet Pressure (max)
2 bar
Inlet Vacuum (max)
5 in Hg
Input Shaft Type
25.4 mm Keyed (SAE J744-25-1)
Offstroke Response
0.020 s
Onstroke Response
0.050 s
Output Flow @ 1800 R/min
73.8 L/min
Pressure Port Thread
1.3125-12 UN-2B (SAE J514)
Rated Pressure
210 bar
Rated Speed
1800 r/min
Rotation
Right Hand (CW)
Suction Port Thread
1.875-12 UN-2B (SAE J514)
1620 Old Apex Road
Shipping & Payment Options
