Vickers | PVQ10-A2R-SE1S-20CG-30
PVQ10-A2R-SE1S-20CG-30
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVQ10-A2R-SE1S-20CG-30 pump belongs to the PVQ Piston Pumps series from Vickers and is intended for hydraulic automation where stable flow and pressure control are required. It displaces 10.5 cm³ per revolution (0.643 in³/rev), delivering moderate output while keeping package size small. A rated speed of 1800 r/min makes it compatible with common electric motors, and the unit withstands 210 bar (3000 psi) to serve medium-pressure circuits. When driven to that pressure the input power demand is 7.4 kW (10 hp), allowing the use of compact prime movers. Right-hand (clockwise) rotation sets the drive direction, and a remote pressure compensator identified as CG lets a pilot valve adjust system pressure from a distance. Mounting follows the SAE J744 82-2 (SAE A) flange pattern for easy interchangeability, and torque is transferred through a 0.75-inch keyed shaft that is 1.75 inches long.
An SAE O-ring rear port layout simplifies plumbing because both the inlet and outlet use 1.0625-inch connections located on the back face. The suction line must stay below 2 bar (30 psig) and no lower than a 5 inHg (0.2 bar) vacuum to prevent aeration, while case drain pressure is limited to 0.35 bar (5 psig) to protect internal seals. A nitrile (Buna-N) shaft seal retains fluid and keeps contaminants out, supporting long service life. The assembly weighs 7.2 kg (16 lb), so one technician can install or remove it without lifting equipment.
Technical Specifications
Case Pressure Limit
0.35 bar (5 psig)
Control Type
Remote Pressure Compensator (CG)
Displacement
10.5 cm3/rev (0.643 in3/rev)
Inlet Port Size
1.0625 in (SAE O-ring)
Inlet Pressure Limit
2 bar (30 psig)
Inlet Vacuum Limit
5 inHg (0.2 bar)
Input Power At Max Pressure
7.4 kW (10 hp)
Input Shaft
0.75 in Keyed, 1.75 in Long
Max Pressure
210 bar (3000 psi)
Mounting Flange
SAE J744 82-2 (SAE A)
Outlet Port Size
1.0625 in (SAE O-ring)
Port Type/location
SAE O-Ring Rear
Rated Speed
1800 r/min
Rotation
Right-Hand (CW)
Shaft Seal
Nitrile (Buna-N)
Weight
7.2 kg (16 lb)
1620 Old Apex Road
Shipping & Payment Options
