Vickers | PVQ10-A2R-SE1S-20-CM7-12
PVQ10-A2R-SE1S-20-CM7-12
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVQ10-A2R-SE1S-20-CM7-12 variable-displacement pump belongs to the PVQ Piston Pumps series produced by Vickers for hydraulic automation circuits that require controlled flow. Its geometric displacement of 10.5 cm³ per revolution supplies moderate volume to cylinders and motors, while a rated speed of 1800 r/min aligns with standard electric drive motors. The unit draws a maximum of 7.4 kW, so a 10 hp prime mover is sufficient, and it withstands system pressures up to 210 bar. A compensator begins to reduce displacement at 69 bar to limit energy use under partial load. Right-hand clockwise rotation matches common engine output shafts, and a 0.75 in × 1.75 in keyed input shaft ensures secure coupling. An SAE J744 82-2 mounting flange enables direct face mounting to SAE A pads, and the 7.2 kg weight keeps handling straightforward during installation.
The rear inlet port is a 1.0625 in SAE O-Ring connection that admits oil with minimal restriction, and an identical 1.0625 in SAE O-Ring outlet port returns the pressurized flow to the circuit. A 0.562-18 UN-2B case-drain port routes internal leakage, and case pressure must stay below 0.35 bar to protect bearings and seals. The pump tolerates boosted supply lines up to 2 bar, while an inlet vacuum limit of 0.2 bar defines the lowest acceptable suction pressure before cavitation may occur. A Buna N shaft seal blocks external leakage and resists common mineral oils. These port dimensions and pressure limits collectively maintain volumetric efficiency and safeguard internal components during continuous duty.
Technical Specifications
Case Drain Port Size
0.562-18 UN-2B (SAE)
Case Pressure Max
0.35 bar (5 psig)
Compensator Setting
69 bar (1000 psi)
Geometric Displacement
10.5 cm3/rev (0.643 in3/rev)
Inlet Port Size
1.0625 in SAE O-Ring (Rear)
Inlet Pressure Max
2 bar (30 psig)
Inlet Vacuum Limit
0.2 bar (5 in Hg)
Input Shaft
0.75 in Dia × 1.75 in Keyed
Max Input Power
7.4 kW (10 hp)
Maximum Pressure
210 bar (3000 psi)
Mounting Flange
SAE J744 82-2 (SAE A)
Outlet Port Size
1.0625 in SAE O-Ring (Rear)
Rated Speed
1800 r/min
Rotation
Right-Hand (CW)
Shaft Seal Material
Buna N (Nitrile)
Weight
7.2 kg (16 lb)
1620 Old Apex Road
Shipping & Payment Options
