Vickers | PVQ10-A2R-SE1S-20-C-M7-D-12
PVQ10 A2R SE1S 20 C M7 D 12
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVQ10 A2R SE1S 20 C M7 D 12 pump is manufactured by Vickers for the PVQ Piston Pumps series and supplies hydraulic power in automated machinery. A geometric displacement of 10.5 cm³ per revolution establishes the fixed volume of fluid moved on each shaft turn, while a rated speed of 1800 rpm defines the typical drive velocity used to reach the catalog flow. The unit can absorb up to 7.4 kW of input power, so electric-motor or engine selections must cover that demand. Its 0.75 in keyed shaft that extends 1.75 in enables direct coupling to common SAE A mounts, and the right-hand (clockwise) rotation matches most single-pump drive trains. A SAE J744 82-2 (SAE A) mounting flange positions the housing accurately on the prime mover and maintains concentricity for low vibration.
The pump uses a low-pressure compensator, identified as CM7, to trim displacement when outlet load reaches the 69 bar set point, which reduces heat and energy consumption in light-duty circuits. An adjustable displacement stop, coded D, allows limiting the maximum stroke to match flow requirements. Working pressure can rise to 210 bar, giving headroom for intermittent peaks, whereas inlet pressure must stay below 2 bar and case pressure below 0.35 bar to protect seals. A Buna-N shaft seal contains internal oil and withstands standard petroleum fluids. Service lines attach through an 11/16-12 UN-2B outlet port, and excess leakage exits the 9/16-18 UN-2B case-drain port to prevent housing pressurization. The pump weighs 7.2 kg, allowing one-person handling during installation or maintenance.
Technical Specifications
Approximate Weight
7.2 kg (16 lb)
Case Drain Port
9/16-18 UN-2B
Compensator Setting
69 bar (1000 psi)
Control Type
Low Pressure Compensator (CM7)
Geometric Displacement
10.5 cm3/rev (0.643 in3/rev)
Input Shaft
0.75 in Keyed x 1.75 in
Max Case Pressure
0.35 bar (5 psig)
Max Displacement Stop
Adjustable (D)
Max Inlet Pressure
2 bar (30 psig)
Max Input Power
7.4 kW (10 hp)
Maximum Pressure
210 bar (3000 psi)
Mounting Flange
SAE J744 82-2 (SAE A)
Outlet Port Thread
11/16-12 UN-2B
Rated Speed
1800 rpm
Rotation
Right-Hand (CW)
Shaft Seal
Buna-N
1620 Old Apex Road
Shipping & Payment Options
