Vickers | PVM045ER06CE2A315000000AB
PVM045ER06CE2A315000000AB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVM045ER06CE2A315000000AB hydraulic pump belongs to the PVM Code B Piston Pumps series and is manufactured by Vickers. Designed for hydraulic automation, it converts mechanical drive energy into controlled fluid flow for actuators. The fixed displacement of 45.1 cm³/rev defines the volume delivered with each shaft turn, while the pressure compensator control (code A) adjusts swashplate angle to maintain line pressure. A compensation setting of 315 bar protects downstream equipment by limiting system pressure to that level, and the rated pressure of 315 bar specifies the continuous working limit. The pump tolerates peak excursions to 350 bar for short transients. Clockwise rotation matches common engine-side drives, and the absence of an auxiliary mounting or through drive simplifies layouts that use a single pump. SAE J518 flange ports provide a secure, leak-resistant interface for high-pressure piping.
At its maximum speed of 1800 r/min the unit produces 76 L/min, giving adequate flow for medium-capacity cylinders and motors. A maximum torque demand of 221 Nm at 315 bar and an input power requirement of 41 kW guide selection of the prime mover. The input shaft follows the SAE J744-25-1 B-B straight-keyed standard, allowing direct coupling to electric or diesel drives without custom hubs. An SAE B two-bolt mounting flange aligns the housing to common pump pads. End-ported construction keeps the pressure and inlet ports at the rear face, helping compact installation against a manifold block. The dry weight of 24 kg permits manual handling during service, so removal does not require lifting equipment.
Technical Specifications
Auxiliary Mounting
None (Non-Through Drive)
Control Type
Pressure Compensator (Code A)
Displacement
45.1 cm³/rev
Input Shaft
SAE J744-25-1 B-B Straight Keyed
Main Port Location
End Ported
Max Flow @1800 R/min
76 L/min
Max Input Power @315 Bar
41 kW
Max Speed
1800 r/min
Max Torque @315 Bar
221 Nm
Mounting Flange
SAE B 2-bolt
Peak Pressure
350 bar
Port Type
SAE J518 Flange Ports
Pressure Comp Setting
315 bar
Rated Pressure
315 bar
Rotation
Clockwise
Weight (dry)
24 kg
1620 Old Apex Road
Shipping & Payment Options
