Vickers | XCT06F10
XCT06F10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The XCT06F10 valve belongs to the Pressure Reducing Valves series from Vickers and is installed to keep downstream pressure at a predetermined level in hydraulic automation lines. It fits a 3/4 in nominal size so it mounts directly into medium-capacity circuits. The design accepts inlet pressures up to 210 bar (3000 psi) while requiring at least a 10 bar (150 psi) differential between inlet and outlet to maintain stable regulation. Reduced pressure can be set as low as 13.8 bar (200 psi) for sensitive actuators that need lower operating loads. Passage geometry supports flow rates to 114 L/min (30 USgpm), allowing the valve to handle pump outputs common in presses and test stands. An external drain with a G1/4 thread limits back-pressure to 1.7 bar (25 psi), and a separate G1/4 gauge port permits direct connection of pressure instruments. The steel body weighs 5.9 kg (13 lb), providing the mass needed to resist vibration on manifold blocks.
The XCT06F10 operates in ambient conditions from ‑20 C (-4 F) to +70 C (+158 F) so it can remain in service throughout seasonal temperature swings. Working fluid may be as cold as ‑20 C (-4 F) and may reach +80 C (+176 F) when mineral oil is used or +54 C (+130 F) when the fluid contains water, ensuring compatibility with common hydraulic media. A viscosity window between 13 cSt and 500 cSt allows the valve to start with cold oil and continue regulating after the fluid warms during extended cycles. These temperature and viscosity ranges protect the spool surfaces from excessive wear and keep response times consistent. The broad environmental allowances let the valve serve both indoor power units and mobile equipment without additional heating or cooling provisions. The stated limits also reduce the risk of seal degradation during prolonged high-temperature service.
Technical Specifications
Drain Port Max Pressure
1.7 bar (25 psi)
Drain Port Thread
G1/4
Gauge Port Thread
G1/4
Mass
5.9 kg (13 lb)
Max Ambient Temp
+70 C (+158 F)
Max Flow Rate (f)
114 L/min (30 USgpm)
Max Fluid Temp (oil)
+80 C (+176 F)
Max Fluid Temp (water-containing)
+54 C (+130 F)
Max Inlet Pressure
210 bar (3000 psi)
Max Viscosity
500 cSt
Min Ambient Temp
-20 C (-4 F)
Min Fluid Temp
-20 C (-4 F)
Min Inlet-outlet Differential
10 bar (150 psi)
Min Reduced Pressure (f)
13.8 bar (200 psi)
Min Viscosity
13 cSt
Nominal Size
3/4 in
1620 Old Apex Road
Shipping & Payment Options
