Vickers | KDG4V32C20NMUH760
KDG4V32C20NMUH760
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KDG4V32C20NMUH760 valve belongs to the KDG Non-feedback Proportional Valves series produced by Vickers for hydraulic automation circuits that need proportional control without integral feedback. It regulates flow in both directions through a single-stage spool that uses a meter-in/meter-out scheme to modulate actuator speed while keeping pressure losses low. The solenoid coil operates on 24 V DC, and connection is made through an ISO 4400 (DIN 43650) plug, which simplifies field wiring. At nominal conditions the a and b ports each pass 20 L/min, and the assembly withstands system pressures up to 350 bar (5000 psi). Control electronics are not mounted on the valve, and there is no feedback sensor, so performance depends on an external drive card. A plain manual override permits spool shifting during setup or power loss.
Dimensional constraints suit compact manifolds: the unit measures 237.998 mm long, 48.260 mm wide, and 86.360 mm high, so stack clearances can be planned accurately. It attaches to an ISO 4401-03 (CETOP 3/NG06) interface, allowing interchange with other size-03 directional devices on a common subplate. Viton seals resist mineral oil and many synthetic fluids, provided cleanliness is maintained at ISO 4406 class 17/15/12 or better. These attributes support stable proportional control across cylinders or motors that are supplied from central manifolds, and they limit maintenance to routine fluid filtration and periodic seal checks. In multi-station blocks, the compact envelope leaves space for adjacent pressure gauges or cross-pilot passages, preserving accessibility for instrumentation.
Technical Specifications
Coil Voltage
24 V DC
Electrical Connection
ISO 4400 (DIN 43650)
Feedback Sensor
No
Fluid Cleanliness (iso 4406)
17/15/12
Height
86.360 mm
Length
237.998 mm
Manual Override
Plain
Maximum Working Pressure
350 bar (5000 psi)
Metering Type
Meter In/Meter Out
Mounting Interface
ISO 4401-03 (CETOP 3/NG06)
On-board Electronics
No
Rated Flow (a Port)
20.00 L/min
Rated Flow (b Port)
20.00 L/min
Seal Material
Viton
Stage
Single Stage
Width
48.260 mm
1620 Old Apex Road
Shipping & Payment Options
