Vickers | PM4DG4S4LW016C7H60S622
PM4DG4S4LW016C7H60S622
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PM4DG4S4LW016C7H60S622 directional valve belongs to the Directional Control Valves series and is manufactured by Vickers. Designed for hydraulic automation, it shifts flow paths with a solenoid-operated actuation system that responds to electrical commands rather than mechanical linkages. The coil is rated at 24 VDC, allowing direct connection to common machine control relays, and the 4-pin connector supplies a sealed termination that speeds replacement. An indicator light on the coil housing confirms energization at a glance, while the absence of a manual override restricts actuation to remote signals only. A spring-centered, three-position spool automatically returns the valve to neutral when power is removed, and the ISO 4401-05 mounting interface aligns with standard sub-plates. Because the unit lacks a spool position monitor, feedback must be provided by external sensors if required.
Hydraulic performance is specified for a maximum flow of 95 L/min, permitting use on medium-capacity circuits, and a maximum pressure of 250 bar so the valve can tolerate typical industrial pump outputs. It is intended for petroleum oils, and required fluid cleanliness is 20/18/15 micron to protect the precision lands from wear. Buna-N seals are fitted to resist oil swelling and maintain leakage integrity across the full pressure range. Physical dimensions of 9.500 in length, 2.580 in width, and 5.080 in height enable compact manifold layouts and simplify envelope planning in machinery. These characteristics allow the valve to manage direction control duties without excessive space or filtration demands.
Technical Specifications
Actuation Type
Solenoid Operated
Coil Voltage
24 VDC
Electrical Connection
4-Pin Connector
Fluid Cleanliness
20/18/15 micron
Fluid Compatibility
Petroleum Oils
Height
5.080 in
Indicator Light
Yes
Interface
ISO 4401-05
Length
9.500 in
Manual Override
None
Max Flow
95 L/min
Max Pressure
250 bar
Seal Material
Buna-N
Spool Position Monitor
No
Spring Arrangement
Spring-Centered, Three Position
Width
2.580 in
1620 Old Apex Road
Shipping & Payment Options
