Vickers | PBDG4S4L016C50
PBDG4S4L016C50
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PBDG4S4L016C50 valve is part of the Directional Control Valves series produced by Vickers for hydraulic automation tasks that require reliable path selection between pumps, actuators, and return lines. It employs spool type 6, which defines the flow paths for each operational position, and a spring-centered three-position arrangement that returns the spool to neutral when the solenoid is not energized. Installation is handled through an ISO 4401-05 mounting interface, allowing the unit to bolt directly to standardized subplates, and the subplate/manifold mount style lets it slot into modular blocks without custom tubing. The hydraulic sections are rated for a maximum operating pressure of 3000 psi while the tank port can tolerate up to 1000 psi, ensuring safe return flow under back-pressure conditions. A peak flow capacity of 20 gpm supports medium-size cylinders and motors. The valve is intended for use with petroleum oils, and maintaining a fluid cleanliness level of 20/18/15 prevents abrasive wear or sticking during high-cycle service.
The electrical end of the PBDG4S4L016C50 uses a 115 VAC 60 Hz coil so it connects directly to common plant power without a transformer. Flying leads are provided instead of a fixed connector, giving the installer the option to route conductors through flexible conduit or tie them into terminal strips. The solenoid reaches pull-in within 20–40 ms, providing a predictable actuation delay for motion controllers that coordinate multiple valves. An indicator light confirms coil energization at a glance, aiding troubleshooting when circuits are disabled. Continuous operation is permitted up to an ambient temperature of 50 °C, protecting insulation and seals during elevated machine room heat. With a height of 3.85 in and a length of 9.50 in, the housing fits compactly inside manifold banks or tight power units while still leaving space for adjacent components.
Technical Specifications
Coil Rating
115 VAC 60 Hz
Electrical Connection
Flying Leads
Energizing Time
20–40 ms
Fluid Cleanliness Code
20/18/15
Fluid Compatibility
Petroleum Oils
Height
3.85 in
Indicator Light
Yes
Length
9.50 in
Max Flow Rate
20 gpm
Max Operating Pressure
3000 psi
Max Operating Temperature
50 b0C
Mounting Interface
ISO 4401-05
Spool Type
6
Spring Arrangement
Spring Centered (3-Position)
Tank Port Pressure
1000 psi
Valve Mount Type
Subplate/Manifold Mounted
1620 Old Apex Road
Shipping & Payment Options
