PA5DG4S4LW016CH60S471

The PA5DG4S4LW016CH60S471 valve is manufactured by Vickers as part of the Directional Control Valves series. It directs hydraulic oil toward or away from actuators in automated equipment, allowing machine controllers to select motion paths on demand. The spool is shifted by a solenoid, so the actuation type is classified as solenoid operated, which allows electrical command signals to initiate flow changes quickly. A three-position configuration provides two working positions and a centered neutral state, while the spring centered arrangement returns the spool to neutral when power is removed to stop movement safely. Spool type 6 defines the internal land pattern that sets the specific port interconnections in each position. Because the design is single stage, the spool is moved directly without a pilot section, reducing response time. An integrated indicator light confirms coil energization, and the 5-pin connector supplies power and control wiring in a single plug.

For installation, the valve is subplate or manifold mounted, so it can be removed without disturbing hard tubing on the machine. Its mounting pattern matches ISO 4401-05 (NFPA D05), letting users interchange the unit with other components following the same interface standard. Buna-N seals keep leakage low when mineral-based hydraulic fluids are used. The housing length measures 6.840 inches, the width is 2.810 inches, and the height is 3.850 inches; these dimensions help designers confirm clearance inside compact manifolds. The physical size also guides stacking layouts when multiple sections are placed side by side. By combining the stated dimensions with the standardized interface, technicians can replace the valve quickly while maintaining consistent port alignment and seal compression.