Vickers | PA5DG4S4LW016CB60
PA5DG4S4LW016CB60
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PA5DG4S4LW016CB60 is produced by Vickers for the Directional Control Valves series and is intended to direct hydraulic flow in automated machinery. It is solenoid-operated, so electrical signals shift the spool without pilot pressure. The coil is rated for 110 VAC at 50 Hz or 120 VAC at 60 Hz, allowing use on common industrial mains. A mounting interface that follows ISO 4401-05 lets the valve bolt to standard subplates for quick exchange. The design works with petroleum oils, which are the prevalent fluids in mobile and industrial hydraulic circuits. Operating pressure can reach 250 bar (3600 psi), enabling the valve to manage high-energy actuators. Spool type 6 provides the flow paths required for bidirectional motor control, while a spring-centered three-position arrangement returns the spool to a neutral state when the coils are de-energized.
A 5-pin connector handles the electrical hookup and keeps both power and ground leads in a single sealed fitting. There is an indicator light that turns on whenever a coil is energized, giving technicians immediate visual confirmation of valve status. The energization pattern complies with ANSI B93.9 so replacement coils with the same designation will fit and function correctly. No manual override is included, which prevents unintended mechanical shifting during maintenance. The valve is supplied without a spool position monitor, so external sensors must be used if feedback is required. Buna-N seals resist swelling or leakage when exposed to petroleum oils, maintaining circuit integrity over long service intervals. A maximum flow rating of 95 L/min defines the upper limit of throughput and aids system designers in selecting the correct pump and line sizes.
Technical Specifications
Actuation Type
Solenoid Operated
Coil Rating
110 VAC 50 Hz/120 VAC 60 Hz
Electrical Connection
5-Pin Connector
Fluid Compatibility
Petroleum Oils
Indicator Light
Yes
Interface
ISO 4401-05
Manual Override
None
Max Flow
95 L/min
Max Pressure (bar)
250 bar
Max Pressure (psi)
3600 psi
Seal Material
Buna-N
Solenoid Energization Id
ANSI B93.9
Spool Position Monitor
No
Spool Type
6
Spring Arrangement
Spring Centered, Three Position
1620 Old Apex Road
Shipping & Payment Options
