1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The PA5DG4S4LW012NH61S471 belongs to the Directional Control Valves series produced by Vickers for hydraulic automation circuits that require electrically commanded flow routing. Actuation is solenoid operated, so coil energization shifts the spool without manual effort. A single-stage layout keeps internal passages direct, and spool type 2 establishes the specific porting pattern needed in standard pressure lines. Because the spring arrangement is no spring and detented, the spool stays in its last position after power removal. A built-in indicator light shows coil energization, allowing quick visual checks during setup. Electrical connection is provided through a 5-pin connector, and a matching 5-pin male plug is supplied to simplify wiring. The mounting interface follows ISO 4401-05 (NFPA D05), letting the valve drop onto common subplates, and the unit is intended for either subplate or manifold mounting to streamline replacement in modular blocks.
Buna-N seals contain internal leakage and resist common petroleum-based fluids, supporting long service intervals. Overall height is 3.850 in, which helps designers verify stack clearance in crowded control enclosures. Width is 2.810 in, equal to 71.374 mm, so adjacent valve stations can be spaced accurately on a manifold face. Length measures 12.540 in, or 318.516 mm, defining the required rail depth when the valve is installed parallel to a cabinet wall. The valve is classified for directional control duties, matching applications that alternate actuator flow paths under discrete electrical commands.
Actuation Type
Solenoid Operated
Connector Included
5-Pin Male
Electrical Connection
5-Pin Connector
Height (in)
3.850 in
Indicator Light
Yes
Length (in)
12.540 in
Length (mm)
318.516 mm
Mounting Interface
ISO 4401-05 (NFPA D05)
Seal Material
Buna-N
Spool Type
2
Spring Arrangement
No Spring, Detented
Stage
Single Stage
Valve Mount Type
Subplate/Manifold Mounted
Valve Type
Directional Control Valve
Width (in)
2.810 in
Width (mm)
71.374 mm
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business