Vickers | PA5DG4S4LW-0133C-H-60-S324
PA5DG4S4LW-0133C-H-60-S324
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PA5DG4S4LW-0133C-H-60-S324 directional control valve belongs to the Directional Control Valves series produced by Vickers for hydraulic automation circuits where accurate port switching is required. A 24 VDC coil energizes the solenoid so that it can shift the spool with standard low-voltage control hardware, while a coil power draw of 30 W limits electrical loading on machine power supplies. The 5-pin electrical connector provides a quick-disconnect interface that speeds maintenance and prevents wiring errors. Mechanical attachment follows the ISO 4401-05 pattern, and the unit matches the D05 envelope size, enabling direct interchange with other valves that share this industrial footprint. Subplate or manifold mounting supports modular stacking in hydraulic manifolds and reduces piping. A closed-center spool that bleeds ports A and B isolates actuators during neutral conditions to minimize flow when the valve is de-energized. A spring-centered arrangement automatically returns the spool to its neutral position after power is removed, ensuring dependable fail-safe behavior.
The valve is compatible with petroleum-based oils, allowing use in most conventional hydraulic systems without fluid conversion. It passes a maximum flow rate of 25 gpm so line sizing can be matched to medium-capacity actuators, and it withstands operating pressures up to 3600 psi to suit high-pressure circuits. The tank port can tolerate back-pressure levels up to 1000 psi, which helps designers place remote reservoirs without excessive line size. An internal orifice measuring 0.047 in meters pilot flow for consistent response times. Buna-N seals contain the fluid and resist common hydrocarbon swelling, extending service intervals. The unit functions reliably between 20 °C and 50 °C, covering the typical ambient range of industrial equipment rooms.
Technical Specifications
Coil Power
30 W
Coil Voltage
24 VDC
Electrical Connector
5-Pin
Fluid Compatibility
Petroleum Oils
Interface
ISO 4401-05
Max Flow Rate
25 gpm
Max Operating Pressure
3600 psi
Mounting Type
Subplate/Manifold
Orifice Size
0.047 in
Seal Material
Buna-N
Spool Type
Closed Center (Bleed A & B)
Spring Arrangement
Spring Centered
Tank Port Pressure
1000 psi
Valve Size
D05
Working Temp Max
50 °C
Working Temp Min
20 °C
1620 Old Apex Road
Shipping & Payment Options
