Vickers | KSDG4V392L12MU1H711
KSDG4V392L12MU1H711
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KSDG4V392L12MU1H711 directional control valve belongs to the Directional Control Valves series and is produced by Vickers. Intended for hydraulic automation, it shifts flow paths between actuator lines to start, stop, or reverse motion. Solenoid-controlled actuation allows electrical command of spool position, and the 24 V DC coil voltage aligns with standard machine power supplies. Because the solenoid is at the B port end, mounting orientation is straightforward in manifolds where access to the coil is limited. The valve supports 12 L/min through the A port, permitting moderate cylinder or motor speeds, while the assembly withstands system pressures up to 350 bar. It installs on ISO 4401-03, NFPA D03, or CETOP 3 subplates so it can replace common size 03 valves without rework. Operation with antiwear hydraulic oils is specified, and a fluid cleanliness code of 17/15/12 should be maintained to protect internal lands and seals.
A B port flow capacity of 12 L/min mirrors the A side rating so return and supply circuits remain balanced and circuit calculations are simplified. An ISO 4400 electrical connector with fitted plugs simplifies the cable run, seals the coil leads, and shortens change-over time during service. There is a feedback sensor that reports spool position to higher-level controls, yet no on-board electronics are included, so the amplifier can be mounted in a cooler, low-vibration enclosure. A plain manual override provides local shifting during commissioning or power loss, letting maintenance staff move the spool without electrical power. External dimensions of 230.886 mm length, 48.006 mm width, and 87.122 mm height help planners confirm envelope clearance, verify stack spacing, and maintain access for the connector. These physical limits support compact power units while preserving sufficient hand clearance for override access.
Technical Specifications
A Port Flow
12 L/min
Actuation Type
Solenoid Controlled
B Port Flow
12 L/min
Build Orientation
Solenoid at B Port End
Coil Voltage
24 V DC
Electrical Connection
ISO 4400 With Fitted Plugs
Feedback Sensor
Yes
Fluid Cleanliness Code
17/15/12
Fluid Compatibility
Antiwear hydraulic oils
Manual Override
Plain
Max Operating Pressure
350 bar
Mounting Interface
ISO 4401-03/NFPA D03/CETOP 3
On-board Electronics
None
Product Height
87.122 mm
Product Length
230.886 mm
Product Width
48.006 mm
1620 Old Apex Road
Shipping & Payment Options
