Vickers | KBSDG4V392L05PE7H710
KBSDG4V392L05PE7H710
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBSDG4V392L05PE7H710 directional valve belongs to the Directional Control Valves series produced by Vickers for hydraulic automation tasks such as switching actuator flow paths. It tolerates a maximum working pressure of 350 bar, letting it control high-pressure circuits in presses and mobile machinery. The unit mounts on a subplate that follows the ISO 4401-03 (D03) interface, so it can be swapped with other D03 components without redrilling ports. Its integrated amplifier runs from a 24 V DC power supply, and the design limits supply current to 3 A to protect cabinet wiring. The electronics accept a current command signal identified as type M2, and an input impedance of 100 Ω matches typical PLC outputs. A 10 kHz PWM switching frequency drives the solenoid smoothly, giving proportional spool positioning with reduced audible noise.
Continuous duty operation is supported by a 100 % ED rating, meaning the coil may remain energized indefinitely without overheating. The enclosure carries IP65 and IP67 protection ratings, allowing exposure to dust, splashing water, or temporary immersion during equipment washdown. An EMC immunity level of 10 V/m shields the control electronics from radiated fields in plant environments. The valve can operate with ambient air temperatures up to 70 °C while the hydraulic oil may also reach 70 °C, maintaining consistent response under elevated process heat. For logistics or idle storage, the assembly withstands temperatures from −25 °C to +85 °C without damage. Wiring is straightforward because Pin C is not connected, reducing the risk of mis-termination when fitting standard seven-pin connectors.
Technical Specifications
Ambient Air Temp Max
70 °C
Command Input Impedance
100 Ω
Command Signal Type
Current Input (M2)
Duty Cycle Rating
100% ED
Emc Immunity Level
10 V/m
Ip Protection Rating
IP65 and IP67
Max Supply Current
3 A
Maximum Working Pressure
350 bar
Mounting Interface
ISO 4401-03 (D03)
Mounting Style
Subplate Mounted
Oil Temperature Max
70 °C
Pin C Function
Not Connected
Power Supply Voltage
24 V DC
Pwm Frequency
10 kHz
Storage Temperature Max
+85 °C
Storage Temperature Min
-25 °C
1620 Old Apex Road
Shipping & Payment Options
