Vickers | KBHDG4V35XPE710
KBHDG4V35XPE710
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBHDG4V35XPE710 valve belongs to the Directional Control Valves series and is manufactured by Vickers for hydraulic automation where electrical commands position a spool to change flow paths. The electronics accept a ±10 V DC command signal, and movement begins only after the threshold command voltage of 0.25 V is exceeded. A ±10 V DC monitor signal on pin F returns actual spool position to the control system. Dynamic performance is defined by a 17 ms step response from 0 to 100 percent, while hysteresis stays below 1 percent of maximum stroke to improve repeatability. The driver is powered from a 24 V DC supply and will tolerate 21 to 36 V DC, demanding up to 3 A during full stroke. Pulse-width modulation at 10 kHz energizes the solenoids and keeps acoustic emissions low.
The valve installs on an ISO 4401-03 / ANSI B93.7M-D03 interface, enabling direct substitution for standard D03 mounting patterns. Its enclosure carries IP65 and IP67 ratings so it withstands water spray and temporary immersion. Acceptable ambient air temperatures range from 0 to 70 °C, and the same limits apply to the hydraulic oil; operation can start at −20 °C, providing cold-start capability in outdoor equipment. Ports P, A, and B are rated for 350 bar, while the tank port t endures 105 bar, allowing high-pressure circuits with a lower return-line rating. These thermal and pressure allowances let the KBHDG4V35XPE710 achieve reliable directional changeover in servo or proportional manifolds exposed to demanding field conditions.
Technical Specifications
Ambient Air Temp
0 to 70 °C
Command Signal
±10 V DC
Hysteresis
<1% of max stroke
Max Pressure (p, A, B)
350 bar
Max Pressure (t)
105 bar
Max Supply Current
3 A
Min Operating Temp
−20 °C
Monitor Signal
±10 V DC (pin F)
Mounting Interface
ISO 4401-03 / ANSI B93.7M-D03
Oil Temp Range
0 to 70 °C
Protection Rating
IP65 and IP67
Pwm Frequency
10 kHz
Step Response (0–100%)
17 ms
Supply Voltage
24 V DC
Supply Voltage Range
21–36 V DC
Threshold Command Voltage
0.25 V
1620 Old Apex Road
Shipping & Payment Options
