Vickers | KBFTG4V52B30NZPE7H710
KBFTG4V52B30NZPE7H710
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBFTG4V52B30NZPE7H710 directional valve belongs to the Directional Control Valves series produced by Vickers for automated hydraulic circuits. It employs solenoid-controlled actuation to shift the spool electrically and direct oil to the required actuator ports. A spring-centered design returns the spool to neutral when the coil is de-energized to prevent unintended movement. The coil is rated at 24 VDC, allowing direct connection to common machine power supplies, and wiring is completed through a 7-pin plug with a supplied mating half. On-board KBF electronics energize the solenoids and condition the 1-stage LVDT feedback signal that reports spool position to the controller. A cast iron body provides the strength needed for repeated pressure cycling in industrial service.
The valve carries a nominal flow capacity of 30 L/min so moderate pump outputs can be routed without excessive pressure loss, and it withstands system pressures up to 315 bar. Reliable operation requires hydraulic fluid cleanliness at ISO 17/15/12, while acceptable media include antiwear hydraulic oils and non-alkyl phosphate esters. The mounting face conforms to ISO 4401-05, NFPA D05, and CETOP 5 patterns, and subplate installation lets technicians swap the unit without disturbing hard plumbing. There is no manual override, which means all shifts must be commanded electrically. Service temperatures can range from -20 °C to 70 °C, enabling use in cold starts and warm industrial environments.
Technical Specifications
Actuation Type
Solenoid Controlled
Body Material
Cast Iron
Build Type
Spring Centered
Coil Voltage
24 VDC
Electrical Connection
7-Pin Electrical Plug With Mating Half
Feedback Type
1-Stage LVDT
Flow Rate
30 L/min
Fluid Cleanliness
17/15/12
Fluid Compatibility
Antiwear Hydraulic Oils; Non-Alkyl Phosphate Esters
Interface
ISO 4401-05/NFPA D05/CETOP 5
Manual Override
None
Maximum Pressure
315 bar
On-board Electronics
KBF
Valve Mount Type
Subplate
Working Temperature Max
70 C
Working Temperature Min
-20 C
1620 Old Apex Road
Shipping & Payment Options
