Vickers | KBFDG5V72C200NXM1PE7H110
KBFDG5V72C200NXM1PE7H110
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBFDG5V72C200NXM1PE7H110 valve belongs to the Directional Control Valves series produced by Vickers for hydraulic automation tasks. It uses solenoid-controlled pilot operation to shift the main spool, giving remote electrical control of flow direction. A spring-centered build returns the spool to its neutral state when power is removed, safeguarding machinery. The unit runs from a 24 VDC supply so it connects directly to standard control panels. Motion commands are issued as ±10 VDC signals, allowing proportional positioning from common servo cards, and the coils are driven at a 10 kHz PWM frequency to minimize pressure ripple. A 100 % ED duty rating lets the solenoids remain energized continuously, while the maximum supply current of 3 A limits heat rise in the wiring. A 7-pin plug with a mating half provides a secure electrical interface, and a plain manual override permits manual shifting during setup or emergencies.
The valve supports a nominal flow of 200 L/min (52 US gpm) to supply medium-to-large actuators, and it withstands working pressures up to 350 bar (5000 psi), matching high-pressure industrial systems. Mounting follows the ISO 4401-07 (NFPA D07/CETOP 7) pattern so it mates with standardized sub-plates. An IP65/IP67 ingress rating shields the enclosure from dust and water during wash-down operations. Reliable service requires hydraulic fluid cleanliness of 17/15/12 per ISO 4406 to prevent spool wear, and the design is compatible with antiwear oils and non-alkyl phosphate esters for flexibility in fluid selection. A ±10 VDC spool monitor output feeds back actual spool position to the controller for closed-loop verification of commanded movement.
Technical Specifications
Actuation Type
Solenoid Controlled Pilot Operated
Build Type
Spring Centered
Command Input
±10 VDC
Duty Rating
100% ED
Electrical Connector
7-Pin Plug With Mating Half
Fluid Cleanliness (iso 4406)
17/15/12
Fluid Compatibility
Antiwear Oils, Non-alkyl Phosphate Esters
Ingress Protection
IP65/IP67
Manual Override
Plain
Max Supply Current
3 A
Maximum Pressure
350 bar (5000 psi)
Mounting Interface
ISO 4401-07 (NFPA D07/CETOP 7)
Nominal Flow Rating
200 L/min (52 USgpm)
Pwm Frequency
10 kHz
Spool Monitor Output
±10 VDC
Supply Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
