Vickers | KBDG5V-7-2C180N100-E-H-M1-PE7-H1-10
KBDG5V-7-2C180N100-E-H-M1-PE7-H1-10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBDG5V-7-2C180N100-E-H-M1-PE7-H1-10 valve is part of the Directional Control Valves series produced by Vickers for proportional management of hydraulic actuators. It operates on a 24 VDC supply that powers the onboard electronics, while a ±10 VDC command signal establishes the required spool position for flow metering. The electronics modulate the solenoid at 10 kHz, and current draw is limited to 3 A to match common mobile power sources. A matching ±10 VDC monitor signal is available on pin F to report actual spool movement back to the motion controller. Wiring is handled through a 7-pin plug coded PE7, which consolidates power, command, and feedback lines. Dynamic performance is defined by an energizing time of 55 ms at 150 bar and a de-energizing time of 45 ms, allowing repeatable actuation in closed-loop systems.
In the hydraulic circuit the valve centers in a closed center state, and a spring-centered spool returns to this position when the solenoid is de-energized. Shifting the spool requires a control volume of 7.28 cm³, a figure relevant when sizing the pilot flow. Once actuated, spool 2 passages accommodate up to 300 L/min (80 US gpm), while pressure on ports P, A, B, T, and X may reach 350 bar without derating. The pilot stage accepts external supply through port X and tolerates the same 350 bar, whereas back pressure on port Y must stay below 210 bar. These limits preserve linear flow characteristics and prevent seat erosion during high-duty cycles.
Technical Specifications
Center Condition
Closed Center
Command Signal
±10 VDC (M1)
Control Volume Center-to-end
7.28 cm³
De-energizing Time
45 ms
Electrical Connection
7-Pin Plug (PE7)
Energizing Time (24 Vdc, 150 Bar)
55 ms
Max Flow (spool 2)
300 L/min (80 USgpm)
Max Pressure P/a/b/t/x
350 bar
Max Supply Current
3 A
Monitor Signal (pin F)
±10 VDC
Pilot Pressure Max
350 bar
Pilot Supply
External (port X)
Port Y Max Pressure
210 bar
Pwm Frequency
10 kHz
Spool/spring Arrangement
Spring Centered
Supply Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
