Vickers | KBDG4V32C07NZM1PE7H711
KBDG4V32C07NZM1PE7H711
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBDG4V32C07NZM1PE7H711 directional valve belongs to the Directional Control Valves series and is built by Vickers for precise hydraulic automation. It shifts the spool with solenoid controlled actuation so electronic commands rather than mechanical force determine flow paths. A supply voltage of 24 VDC energizes the coil, while a ±10 VDC command input allows proportional positioning that can be integrated into analog control loops. The coil draws 1.2 A during operation, a value that must be considered in power supply sizing. Electrical wiring is completed through a 7-pin plug coded PE7, simplifying replacement in modular manifolds. The spool is spring centered so it returns to neutral when the signal is lost, and no manual override is fitted, preventing unintended actuation during maintenance. An IP65/IP67 enclosure rating resists dust and water spray in mobile or industrial settings, and the ISO 4401-03 (CETOP 3/NFPA D03) mounting interface permits direct installation on standard subplates without adaptors.
For flow regulation the valve uses a meter-in/meter-out metering scheme, enabling independent control of fluid entering and leaving an actuator. At a rated flow of 7 L/min, equivalent to 1.85 US gpm, the pressure drop across the ports is 5 bar, which defines the energy loss to be expected in a balanced circuit. The maximum operating pressure of 350 bar sets the upper working limit for pumps and accumulators connected to the manifold. Acceptable media include AW hydraulic oils and non-alkyl phosphate esters, and operation requires fluid cleanliness no worse than 17/15/12 to prevent spool wear and silting. These characteristics combine to deliver proportional directional control where repeatable flow and pressure need to be maintained throughout the duty cycle.
Technical Specifications
Actuation Type
Solenoid Controlled
Command Input
±10 VDC
Current
1.2 A
Electrical Connection
7-pin plug (PE7)
Fluid Cleanliness
17/15/12
Fluid Compatibility
AW Oils; Non-Alkyl Phosphate Esters
Ingress Protection
IP65/IP67
Manual Override
None
Max Operating Pressure
350 bar
Metering
Meter In/Meter Out
Mounting Interface
ISO 4401-03 (CETOP 3/NFPA D03)
Pressure Drop At Rated Flow
5 bar
Rated Flow
7 L/min
Rated Flow (us)
1.85 USgpm
Spool Return
Spring Centered
Supply Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
