Vickers | KBDG4V-5-2C65S-Z-M2-PE7-H6-10
KBDG4V-5-2C65S-Z-M2-PE7-H6-10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBDG4V-5-2C65S-Z-M2-PE7-H6-10 valve belongs to the Directional Control Valves series and is produced by Vickers for electrically modulated hydraulic automation. It bolts to an ISO 4401-05 (NFPA D05, CETOP 5, NG10) interface, giving compatibility with industry-standard subplates and manifold blocks. The spool is configured with all ports blocked in the centered position so cylinders or motors remain locked when no command is present. A rated flow of 65 l/min supports medium-capacity circuits, while a maximum operating pressure of 315 bar allows use on high-pressure supply lines. Pressure drop at the rated flow is limited to 5 bar to minimize heat generation and energy loss. The body is cast iron for dimensional rigidity, fluorocarbon seals maintain fluid containment at elevated temperatures, and an external pilot drain routes control oil directly to tank to prevent pressure fluctuations inside the pilot stage.
Electrical actuation is provided by a 24 VDC coil that accepts a 4–20 mA command signal for proportional position control of the spool. Wiring is accomplished through a 7-pin plug designated PE7, and a monitor output of ±10 V is available so control electronics can verify actual coil drive. The solenoid draws 1.2 A under nominal conditions, giving predictable power requirements for the power supply. Because the design includes no manual override, unintentional mechanical repositioning of the spool is eliminated in safety-critical machinery. The unit’s overall length is 11.22 in and its mass is 15.9 lb, dimensions that allow installation within compact valve banks while still permitting single-person handling. These electrical features complete a valve suited for precise, closed-loop directional control in modern hydraulic systems.
Technical Specifications
Body Material
Cast Iron
Coil Voltage
24 VDC
Command Input
4–20 mA
Connector Type
7-Pin Plug (PE7)
Current Draw
1.2 A
Interface
ISO 4401-05 (NFPA D05, CETOP 5, NG10)
Manual Override
None
Monitor Output
±10 V
Pilot Drain
External
Pressure Drop At Rated Flow
5 bar
Pressure Rating
315 bar
Product Length
11.22 in
Product Weight
15.9 lb
Rated Flow
65 l/min
Seal Material
Fluorocarbon
Spool Center Condition
All Ports Blocked
1620 Old Apex Road
Shipping & Payment Options
