Vickers | KBDG4V-3-2C03F-Z-M1-PE7-H7-10
KBDG4V-3-2C03F-Z-M1-PE7-H7-10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The KBDG4V-3-2C03F-Z-M1-PE7-H7-10 valve is produced by Vickers and belongs to the Directional Control Valves series. It regulates hydraulic flow and pressure for automated machinery, and it mates to manifolds through the ISO 4401-03 (ANSI D03) interface. A 24 VDC power supply energizes the onboard electronics. The control board accepts a ±10 VDC command signal that positions the spool proportionally. Movement begins when the input exceeds 0.25 V, allowing sensitive adjustments around the neutral point. A ±10 VDC spool position monitor outputs real-time feedback for closed-loop control systems. Solenoid drive uses 10 kHz pulse-width modulation and can draw up to 3 A during operation. A step change from zero to full command reaches steady state in 17 ms, delivering rapid response.
The valve passes 3 L/min at a 5 bar differential, which suits low-flow servo circuits. Its fine meter-in/meter-out metering profile keeps flow symmetrical when charging or exhausting an actuator. Pressure capacity reaches 350 bar on ports P, A, and B to handle high-pressure supply lines. Port T endures 105 bar so return pressures remain within safe limits. Closing from full stroke to neutral occurs in 16 ms for quick deceleration events. Electrical connections are made through a 7-pin plug, and a mating half is provided to simplify wiring. The housing meets IP65 and IP67, preventing dust ingress and temporary water immersion. There are no manual overrides, so commissioning and emergency operation rely exclusively on electrical commands.
Technical Specifications
Command Input
±10 VDC (M1)
Electrical Connector
7-Pin Plug (Mating Half)
Manual Overrides
None
Max Supply Current
3 A
Metering Type
Fine Meter-In/Meter-Out
Mounting Interface
ISO 4401-03 (ANSI D03)
Port T Max Pressure
105 bar (1500 psi)
Ports P, A, B Max Pressure
350 bar (5000 psi)
Power Supply
24 VDC
Protection Rating
IP65 and IP67
Pwm Frequency
10 kHz
Rated Flow (Δp 5 Bar)
3 L/min
Spool Position Monitor
±10 VDC
Step Response 0–100%
17 ms
Step Response 100%–0
16 ms
Threshold Command Voltage
0.25 V
1620 Old Apex Road
Shipping & Payment Options
