Vickers | DG5SH84C2EWLB20
DG5SH84C2EWLB20
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG5SH84C2EWLB20 valve is produced by Vickers as part of the DG5 Two-Stage Directional Valves series. It is intended to shift hydraulic flow paths in automated circuits that need tandem P–T with closed crossover behavior. The unit employs spool code 4 to provide that tandem center geometry, and it is fitted with a single solenoid mounted on the B end for actuation. External pilot supply is used, allowing pressure to be taken from a separate source, while dual pilot choke adjustment enables independent tuning of opening and closing speeds. Assembly is arranged on the left-hand side, matching installations that standardize port orientation. For dependable service in medium-duty lines, a recommended flow of 265 L/min (70 USgpm) is quoted, and the body withstands an operating pressure up to 310 bar (4500 psi).
In high cycle manifolds the valve can carry a maximum flow of 530 L/min (140 USgpm) without exceeding its design limits, and the pilot stage is rated for 210 bar (3000 psi), the same allowable pressure for the tank return line. The interface follows ISO 4401-08 (NFPA D08) so it bolts directly to standard subplates using 1/2-13 UNC fasteners. Each mounting screw may be tightened to 79 N·m (700 lbf·in) to secure the housing without distortion. Total mass of the assembly is 16.8 kg (37 lb), which technicians should account for when planning support brackets or handling equipment. These characteristics, combined with the two-stage layout, allow the DG5SH84C2EWLB20 to direct large flows while maintaining precise shift control in mobile or industrial hydraulic machinery.
Technical Specifications
Left-hand Assembly
Yes (L)
Max Flow Capacity
530 L/min (140 USgpm)
Max Mounting Bolt Torque
79 N·m (700 lbf·in)
Max Operating Pressure
310 bar (4500 psi)
Max Pilot Pressure
210 bar (3000 psi)
Max Tank Line Pressure
210 bar (3000 psi)
Mounting Bolt Size
1/2-13 UNC
Mounting Interface
ISO 4401-08 (NFPA D08)
Pilot Choke Adjustment
Dual (2)
Pilot Supply
External (E)
Recommended Flow
265 L/min (70 USgpm)
Solenoid Configuration
Single (B End)
Spool Type
4 (Tandem P–T, Closed Crossover)
Valve Weight
16.8 kg (37 lb)
1620 Old Apex Road
Shipping & Payment Options
