Vickers | DG5S8CEVMFWB530
DG5S8CEVMFWB530
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG5S8CEVMFWB530 directional valve belongs to the DG5 Two-Stage Directional Valves series and is manufactured by Vickers for hydraulic automation circuits. Coil identification “B” specifies operation on 110 V AC at 50 Hz or 120 V AC at 60 Hz. A flying lead coil type provides flexible electrical termination, and the housing is tapped with a 1/2 NPT thread for conduit entry. Solenoid energization identity “V” establishes the wiring scheme for correct actuation. Plain overrides allow manual shifting when electrical power is unavailable, while a spring-centered spool restores the valve to neutral automatically. The response is rated standard low shock to moderate pressure rise during transitions. For installation, the body follows the ISO 4401-08 (NFPA D08) mounting pattern, and the securing bolts require 79 N·m (700 lbf·in) of torque to seal the interface.
The valve handles a maximum operating pressure of 210 bar (3000 psi) on the service ports, with the pilot stage accepting the same 210 bar as its maximum pilot pressure and allowing 210 bar on the tank line. Pilot functions rely on external pressure supply and use an external drain route to return fluid to tank. The pilot valve tank port tolerates back-pressure up to 100 bar (1450 psi) without impairing operation. System designers should respect the recommended flow capacity of 170 L/min (45 US gpm) to maintain stable performance. These hydraulic limits combine with the two-stage architecture to deliver precise directional control in medium-pressure industrial power units.
Technical Specifications
Coil Identification
B (110V AC 50 Hz/120V AC 60 Hz)
Coil Type
Flying Lead
Electrical Housing
1/2 NPT Thread
Manual Override
Plain Overrides
Max Operating Pressure
210 bar (3000 psi)
Max Pilot Pressure
210 bar (3000 psi)
Max Tank Line Pressure
210 bar (3000 psi)
Mounting Bolt Torque
79 N·m (700 lbf·in)
Mounting Pattern
ISO 4401-08 (NFPA D08)
Pilot Drain Type
External
Pilot Pressure Source
External
Pilot Valve Tank Pressure Rating
100 bar (1450 psi)
Recommended Flow Capacity
170 L/min (45 US gpm)
Response Type
Standard Low Shock
Solenoid Energization Identity
V
Spool/spring Arrangement
Spring Centered
1620 Old Apex Road
Shipping & Payment Options
