Vickers | DG5S86CWB11
DG5S86CWB11
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG5S86CWB11 valve belongs to the DG5 Two-Stage Directional Valves series and is manufactured by Vickers for hydraulic automation circuits where flow must be routed quickly and repeatably. A flying-lead coil identified as Code F simplifies electrical hookup in confined panels, and the coil is rated for either 110 VAC at 50 Hz or 120 VAC at 60 Hz so it can be powered from common industrial mains. A spring-centered spool keeps the control lands in neutral when the coil is de-energized, and the Type 6 flow path closes port P while connecting ports A and B to T to unload actuators during standby. The valve is approved for continuous service at 210 bar on ports P, A, and B, supporting standard system pressures, while the pilot stage accepts the same 210 bar to ensure consistent actuation speed. It tolerates up to 380 L/min at 210 bar without malfunction, yet a recommended operating flow of 170 L/min limits pressure drop and heat generation.
A maximum tank line pressure of 210 bar allows back-pressure circuits without risking case leakage. Installation follows the ISO 4401-08 (NFPA D08) pattern, and four mounting holes of 13.50 mm diameter receive bolts that must be tightened to 79 N·m to prevent plate separation. The pressure inlet port is bored to 23.00 mm to accommodate high-flow fittings, while a .4375-20 UNF-2B test port provides a location for diagnostic gauges. Electrical leads exit through a 1/2 NPT threaded housing that seals the coil cavity and accepts flexible conduit for protection against moisture. The assembled unit weighs 15.0 kg, so lifting aids may be required when installing it on vertical manifolds.
Technical Specifications
Coil Type
Flying Lead (Code F)
Coil Voltage
110 VAC 50 Hz/120 VAC 60 Hz
Max Flow Without Malfunction
380 L/min (100 USgpm) at 210 bar
Maximum Pilot Pressure
210 bar (3000 psi)
Maximum Tank Line Pressure
210 bar (3000 psi)
Mounting Bolt Torque
79 N·m (700 lbf·in)
Mounting Hole Diameter
13.50 mm (0.531 in)
Mounting Pattern
ISO 4401-08 (NFPA D08)
Pressure Port Diameter
23.00 mm (0.906 in)
Rated Pressure (p,a,b)
210 bar (3000 psi)
Recommended Flow
170 L/min (45 USgpm)
Spool Function
P closed, A & B to T (Type 6)
Spool/spring Arrangement
Spring Centered
Test Port Thread
.4375-20 UNF-2B
Weight
15.0 kg (33 lb)
Wiring Housing
1/2 NPT Thread Housing
1620 Old Apex Road
Shipping & Payment Options
