Vickers | DG5S86CMFPBWLB530
DG5S86CMFPBWLB530
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG5S86CMFPBWLB530 valve is part of the DG5 Two-Stage Directional Valves series manufactured by Vickers for hydraulic automation where controlled flow redirection is required. Its spool arrangement is spring centered, so the element automatically returns to the neutral position when both solenoids are de-energized. A spool type that closes the pressure port while venting ports A and B to tank helps depressurize work lines during standby. The valve supports a recommended flow capacity of 170 L/min (45 US gpm) for continuous duty, and it can pass up to 380 L/min at 210 bar without malfunction to cover short-term peaks. Maximum operating, pilot, and tank line pressures are each rated at 210 bar (3000 psi), aligning the unit with common industrial hydraulic circuits. Fluid cleanliness must be maintained at ISO 19/17/14 to limit wear on the precision-ground spool and sleeve.
A flying-lead coil simplifies cable routing, and the coil accepts 110 V AC 50 Hz or 120 V AC 60 Hz supplies for compatibility with standard control voltages. The Instaplug electrical connector lets maintenance staff replace coils quickly, while a 1/2 NPT threaded wiring housing shields conductors from mechanical damage. An ISO 4401-08 (NFPA D08) mounting interface allows the valve to fit subplates that share this pattern. Six 1/2-13 UNC mounting bolts secure the body, and each fastener may be tightened to 79 N·m (700 lbf·in) to achieve proper gasket compression. With two solenoids installed the assembly weighs 15.0 kg (33 lb), so support structures must be sized accordingly.
Technical Specifications
Cleanliness Class
19/17/14
Coil Type
Flying Lead (F)
Coil Voltage
110V AC 50 Hz/120V AC 60 Hz
Electrical Connection
Instaplug (PB)
Max Flow Without Malfunction (210 Bar)
380 L/min
Max Mounting Bolt Torque
79 N·m (700 lbf·in)
Maximum Operating Pressure
210 bar (3000 psi)
Maximum Pilot Pressure
210 bar (3000 psi)
Maximum Tank Line Pressure
210 bar (3000 psi)
Mounting Bolts
1/2-13 UNC (6)
Mounting Interface
ISO 4401-08 (NFPA D08)
Recommended Flow Capacity
170 L/min (45 USgpm)
Spool Arrangement
C (Spring Centered)
Spool Type
6 (Closed P, Open A & B to T)
Valve Weight (two Solenoids)
15.0 kg (33 lb)
Wiring Housing
1/2 NPT Thread (W)
1620 Old Apex Road
Shipping & Payment Options
