Vickers | DG5S86C2EWHJA10S82M
DG5S86C2EWHJA10S82M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG5S86C2EWHJA10S82M valve belongs to the DG5 Two-Stage Directional Valves series from Vickers. Designed to route pressurized oil in automated machines, it withstands operating pressures up to 210 bar (3000 psi) for typical industrial power units. A recommended flow capacity of 170 L/min (45 USgpm) supports medium-capacity actuators. Spool type 6 keeps port P closed while ports A and B are open to tank, providing load-holding in neutral. The spring-centered return recenters the spool when pilot signal is lost. Dual pilot-choke control refines pilot flow for controlled shifting. A waterproof manual override allows manual actuation during setup or power failure. Installation uses the ISO 4401-08 (NFPA D08) interface, and mounting bolts may be tightened to 79 N·m (700 lbf·in) without damage.
Each mounting hole is 13.50 mm in diameter to accept high-strength fasteners for the specified interface. The valve takes pilot pressure from an external source and tolerates up to 210 bar (3000 psi) on the pilot stage. A 1.00 mm orifice in pilot port A meters pilot oil to moderate spool velocity. Pressure and tank ports both measure 23.00 mm in diameter to accommodate the rated flow. Test fittings on ports A and B use .4375-20 UNF-2B threads so gauges can be attached during commissioning or troubleshooting. These dimensional, pressure, and connection features combine to complete the DG5S86C2EWHJA10S82M configuration for dependable two-stage directional control in hydraulic automation.
Technical Specifications
Manual Override
Waterproof
Max Mounting Bolt Torque
79 N·m (700 lbf·in)
Max Operating Pressure
210 bar (3000 psi)
Maximum Pilot Pressure
210 bar (3000 psi)
Mounting Hole Diameter
13.50 mm
Mounting Interface
ISO 4401-08 (NFPA D08)
Pilot Port A Orifice
1.00 mm
Pilot Pressure Source
External
Port A Test Connection
.4375-20 UNF-2B
Port B Test Connection
.4375-20 UNF-2B
Pressure Port Diameter
23.00 mm
Recommended Flow Capacity
170 L/min (45 USgpm)
Spool Control Modification
Pilot Choke (Dual)
Spool Type
6 (Closed P, Open A & B to T)
Spool/spring Arrangement
Spring Centered (C)
Tank Port Diameter
23.00 mm
1620 Old Apex Road
Shipping & Payment Options
