1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The DG5S4-02-2N-2-T-MFPM4WL-D7-HL7-30-EN623 directional control valve is produced by Vickers as part of the DG5 Two-Stage Directional Valves series and is used to switch hydraulic flow paths in automated equipment. This two-stage assembly employs a pilot section to shift the main spool, and the pilot operated design keeps solenoid forces low while maintaining fast response. Its mounting face matches ISO 4401-05, also known as NFPA D05, so it can bolt directly to standard subplates. The pressure rating reaches 210 bar on the service ports, whereas the tank port is limited to 100 bar. Acceptable fluid or ambient temperatures extend from -18 °C to 65 °C, allowing installation in a wide range of factory environments.
The valve handles up to 115 L/min, giving adequate capacity for medium-flow circuits. Leakage is returned internally to port T, removing the need for an external pilot drain line. A spool pattern designated as type 2 establishes the required actuator flow directions, and two pilot choke adjustments are provided so opening and closing rates can be tuned. Because the spool is held by a detent with no spring, it stays in its last commanded position after power is removed. Electrical connection is made through a PM4 four-pin plug, while an F style flying-lead coil simplifies field wiring. The assembly carries design number 30, identifying its revision level within the product family.
Actuation Type
Pilot Operated
Coil Type
F (Flying Lead)
Design Number
30
Electrical Connector
PM4 4-Pin
Interface
ISO 4401-05 (NFPA D05)
Max Flow Rate
115 L/min
Pilot Drain
Internal (T)
Pressure Rating
210 bar
Spool Control
Pilot Choke Adjustments (2)
Spool Type
2
Spring Arrangement
No Spring, Detented (N)
Stage
Two Stage
Tank Port Rating
100 bar
Valve Type
Directional Control Valve
Working Temp Max
65 C
Working Temp Min
-18 C
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business