Vickers | CVU16EFP1B291931EN19
CVU16EFP1B291931EN19
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The CVU16EFP1B291931EN19 cartridge valve is produced by Vickers within the Cartridge Valves series and is installed in hydraulic blocks to modulate flow and pressure. It is supplied with an electrohydraulic proportional throttle valve cover so electronic commands can vary the spool position. The unit withstands system pressures up to 315 bar, enabling use in high-pressure circuits. A nominal flow capacity of 190 L/min supports medium-to-high throughput lines without excessive pressure loss. The spool lifts once inlet pressure reaches the 2.50 bar cracking setting, establishing predictable opening behavior. An insert ratio of 1:1.4 balances hydraulic forces for stable throttling over the operating range. The valve can run with petroleum oils, water-glycol mixtures, or water-in-oil emulsions, giving flexibility in fluid selection. Cleanliness must be maintained at 18/16/13 to prevent silting of the precision edges. A BSPF gauge port thread allows standard test equipment to monitor cavity pressure during commissioning.
Installation follows the ISO 7368-A cavity standard so machining dimensions match common manifold plates. Four M8 × 35 mounting screws secure the body, and each screw is tightened to 35 N·m to resist cyclic loads. The pilot port orientation complies with ISO conventions, simplifying hose routing in multi-valve stacks. There is no external adjustment, so setpoints are defined by the proportional cover and cannot be altered with a screw. Overall size is controlled with a height of 185.166 mm, a length of 152.654 mm, and a width of 66.548 mm to fit compact power units.
Technical Specifications
Adjustment
No
Bolt Torque
35 Nm
Cover Type
Electrohyd Proportional Throttle Valve
Cracking Pressure
2.50 bar
Flow Rate
190 L/min
Fluid Cleanliness Code
18/16/13
Fluid Compatibility
Petroleum Oil; Water Glycol; W/O Emulsions
Gauge Port Thread
BSPF
Insert Ratio
1:1.4
Max Pressure
315 bar
Mounting Bolts
4 x M8 x 35
Mounting Standard
ISO 7368-A
Pilot Port Orientation
ISO
Product Height
185.166 mm
Product Length
152.654 mm
Product Width
66.548 mm
1620 Old Apex Road
Shipping & Payment Options
