Vickers | CVGPC13P3T1BA20
CVGPC13P3T1BA20
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The CVGPC13P3T1BA20 cartridge valve module is built by Vickers as part of the Cartridge Valves series for hydraulic automation where cavity-mounted components minimize envelope size. The insert is a pilot-operated check design, so reverse flow is blocked until pilot pressure actuates the poppet. Its normal function is normally open, letting oil return freely when pilot pressure is absent in load-holding circuits. The unit supports a flow rate of 10 l/min, providing suitable capacity for small actuators or pilot lines. A pressure rating of 5000 psi enables use in high-pressure mobile and industrial systems without derating. The size corresponds to ISO 4401 size 03, allowing direct integration into standard manifold patterns. Pilot port orientation complies with ISO conventions for repeatable assembly, and the gauge port uses an SAE thread to match common diagnostic fittings.
The module is supplied without a spool position sensor, which simplifies wiring and lowers component cost where electronic feedback is unnecessary. Fluid cleanliness must be maintained at 18/16/13 micron to protect internal sealing edges from contamination-induced leakage. Buna-N seals are fitted, providing compatibility with typical mineral-based hydraulic fluids across a working temperature range from -20 °C to 70 °C. Overall length, width, and height measure 85.090 mm, 49.022 mm, and 39.878 mm respectively, giving a compact form that eases stacking inside multi-function blocks. These dimensional limits help designers allocate cavity depth while ensuring sufficient material around the 5000-psi passages.
Technical Specifications
Flow Rate (l/min)
10
Fluid Cleanliness
18/16/13 micron
Gauge Port Thread
SAE
Height (mm)
39.878
Insert Type
Pilot Operated Check
Length (mm)
85.090
Normal Function
Normally Open
Pilot Port Orientation
ISO
Pressure Rating (psi)
5000
Seal Material
Buna-N
Size
ISO 4401 Size 03
Spool Position Sensor
No
Valve Type
Cartridge Valve Module
Width (mm)
49.022
Working Temp Max (c)
70
Working Temp Min (c)
-20
1620 Old Apex Road
Shipping & Payment Options
