Danfoss | 060B013391
060B013391
Request a Quote
Available, Ships in 1-2 weeks
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 060B013391 differential pressure switch belongs to the MP Differential Pressure Switches series and is produced by Danfoss. It supervises pressure differences in hydraulic automation loops and trips its single-pole double-throw contacts when the setpoint is reached. The device is supplied with a 1000 mm capillary tube so the sensing element can be mounted away from the control enclosure. A fixed contact differential of 0.20 bar creates a narrow switching band for accurate pressure control. Users can adjust the differential setting between 0.30 bar and 4.50 bar to match system requirements, and the low-pressure range spans from −1 bar to 12 bar to cover vacuum start-up and positive operating conditions. The pressure port is a 1/4 in ODF solder connection, allowing direct brazing to copper lines in compact manifolds. An SPDT contact arrangement supports either opening or closing logic during an alarm event.
Its contact block is rated for AC15 2 A at 250 V and DC13 0.2 A at 250 V, providing adequate load capacity for control relays and indicator circuits. An electrical entry sized Pg 13.5 accepts standard cable glands for secure strain relief, and the IP20 enclosure rating limits dust ingress while requiring installation inside a protective panel. The factory setting is 9.0 psig, letting the unit ship ready for general service without field calibration. The switch tolerates continuous operation up to a working pressure of 17 bar and can be pressure-tested to 22 bar during commissioning. A rated impulse voltage of 4 kV protects the relay against transient peaks common in solenoid-driven systems. Once actuated, the relay releases after 45 s to prevent rapid cycling and to give downstream equipment time to stabilize.
Technical Specifications
Capillary Tube Length
1000 mm
Contact Differential
0.20 bar
Contact Function
SPDT
Contact Rating
AC15 2 A, 250 V; DC13 0.2 A, 250 V
Diff Setting Max
4.50 bar
Diff Setting Min
0.30 bar
Electrical Entry Size
Pg 13.5
Enclosure Rating
IP20
Factory Setting
9.0 psig
Lp Range Max
12 bar
Lp Range Min
-1 bar
Max Test Pressure
22 bar
Max Working Pressure
17 bar
Pressure Connection
1/4 in ODF solder
Rated Impulse Voltage
4 kV
Relay Release Time
45 s
1620 Old Apex Road
Shipping & Payment Options
