Bosch Rexroth | Z1FG10P5-3XV
Z1FG10P5-3X/V
Request a Quote
Call for Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The Z1FG10P5-3X/V throttle valve belongs to the ZXFG Throttle Valves series from Bosch Rexroth and serves to meter hydraulic flow in automated circuits. It comes in nominal size 10, providing a compact interface for medium-capacity manifolds. The housing follows the ISO 4401-05-04-0-05 porting pattern so it can drop into standard subplates. A mounting face roughness limited to Rzmax 4 protects the seal line against leakage. The bolt pattern of 80 × 70 mm aligns the valve, and four M6 screws clamp it to the block with uniform preload. Flow reduction is applied only in channel P, while channels A and B permit free flow to minimize pressure loss in return paths. Setting the orifice is carried out through a spindle that incorporates a hex socket and a graduated scale; the socket accepts an 8 mm across-flats key for precise adjustment.
Working conditions reach 315 bar maximum operating pressure, allowing the valve to control high-pressure circuits. A rated flow of 160 l/min ensures sufficient volume for medium-sized actuators without exceeding the throttling range. Mineral-oil media of HL or HLP type are supported, and the design follows DIN 51524 to match common system fluids. Circuit cleanliness must reach ISO 4406 class 20/18/15, limiting particle contamination that could damage the throttling edge. The installation position is optional, so the valve may be mounted horizontally or vertically without performance change. These parameters combine to provide stable, repeatable flow control for hydraulic automation.
Technical Specifications
Adjustment Element
Spindle With Hex Socket And Scale
Adjustment Hex Socket
8 A/F
Bolt Pattern
80 x 70 mm
Cleanliness Class
ISO 4406 20/18/15
Fluid Standard
DIN 51524
Free-flow Channels
A, B
Hydraulic Fluid
Mineral Oil (HL, HLP)
Installation Position
Optional
Maximum Flow
160 l/min
Maximum Operating Pressure
315 bar
Mounting Face Roughness
Rzmax 4
Mounting Screw Quantity
4
Mounting Screw Thread
M6
Nominal Size
10
Porting Pattern
ISO 4401-05-04-0-05
Throttling Channel
P
1620 Old Apex Road
Shipping & Payment Options
