Bosch Rexroth | ZDRE6VP1-1X100MG24K4M
ZDRE6VP1-1X/100MG24K4/M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The ZDRE6VP1-1X/100MG24K4/M proportional control valve is produced by Bosch Rexroth for the ZDRE Proportional Control Valves series. It meters hydraulic flow in closed-loop automation where precise pressure reduction is required. The nominal size 6 body gives port dimensions compatible with small to mid-range circuits, while the ISO 4401-03-02-0-05 porting pattern allows direct mounting on common subplates. A sandwich plate configuration lets the valve be stacked between other modules to save manifold space. The internal spool is identified by the P2 → P1 symbol, indicating that pressure is reduced from the P2 gallery to the P1 outlet. Maximum flow is limited to 30 L/min so pump capacity can be matched without cavitation. Operating pressure reaches 315 bar on the P and P2 ports and 210 bar on the A and B work ports, yet the functional pressure adjustment range is capped at 100 bar for controlled downstream relief. An IP65 housing resists dust ingress and water jets, supporting installation on mobile machinery and exposed plant skids.
The valve is energized from a 24 V DC supply, and the proportional solenoid draws through a 5 Ω coil which sets baseline current consumption. Drive electronics may deliver up to 1600 mA, establishing full stroke of the spool for maximum pressure setting. Connection is made with an EN 175301-803 plug containing three power pins and a protective earth so wiring can be completed with standard molded cables. Pilot stages require only 0.65 L/min of oil, minimizing losses in constant-pressure systems. ISO 4406 cleanliness class 20/18/15 must be maintained to avoid spool sticking and premature wear. The assembly weighs 1.90 kg, allowing manual handling during service or module replacement.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Resistance (20 b0c)
5 a9
Electrical Connector
EN 175301-803 (3-pin + PE)
Max Control Current
1600 mA
Max Operating Pressure (p, P2)
315 bar
Max Operating Pressure (p1, A, B)
210 bar
Maximum Flow
30 L/min
Mounting Type
Sandwich Plate
Nominal Size
6
Pilot Oil Flow
0.65 L/min
Porting Pattern
ISO 4401-03-02-0-05
Pressure Rating
100 bar
Protection Class
IP65
Spool Symbol
P2 → P1
Supply Voltage
24 V DC
Weight
1.90 kg
1620 Old Apex Road
Shipping & Payment Options
