Bosch Rexroth | ZDRE10VP4X-1X250YMG24-8Z4M-7
ZDRE10VP4X-1X/250YMG24-8Z4M-7
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The ZDRE10VP4X-1X/250YMG24-8Z4M-7 proportional control valve belongs to Bosch Rexroth’s ZDRE Proportional Control Valves series and regulates pressure in hydraulic automation systems. It is built in nominal size 10 so the flow passages match ISO size-10 subplates, while an ISO 4401-05-05-0-05 mounting interface lets it mount on standard manifolds. The unit accommodates a maximum flow of 80 l/min, allowing medium-capacity actuators to be driven at controlled speeds. Acceptable oil viscosity ranges from 15 to 380 mm²/s, enabling reliable operation with common hydraulic fluids. A hydraulic fluid temperature window of −20 to +80 °C maintains seal integrity in typical machine environments. Electrical actuation uses a 24 V DC supply so the valve can be powered from common control panels. The solenoid coil resistance is 5.5 Ω at 20 °C, setting the current draw at rated voltage, and a controllable current window of 0.10 to 1.76 A provides proportional pressure adjustment across the device.
The valve body is rated for a maximum operating pressure of 315 bar, and its internal stage permits a P1 set pressure up to 250 bar so circuit pressure can be limited to the required value. Working ports A, B, and X tolerate 350 bar, providing additional margin on actuator lines, while the tank port T is limited to 250 bar to protect return plumbing. Electrical connection is made through an EN 175301-803 plug with three power pins and a protective earth, simplifying field wiring. An IP65 protection class prevents dust ingress and shields the coil against low-pressure water jets during wash-down. NBR sealing is used throughout the valve, matching mineral-oil media and retaining elasticity within the stated temperature range.
Technical Specifications
Electrical Connector
EN 175301-803 (3-pin + PE)
Hydraulic Fluid Temp
-20 to +80 b0C
Max Flow
80 l/min
Max Operating Pressure
315 bar
Mounting Interface
ISO 4401-05-05-0-05
Nominal Size
10
P1 Max Set Pressure
250 bar
Port T Max Pressure
250 bar
Ports A/b/x Max Pressure
350 bar
Protection Class
IP65
Seal Material
NBR
Solenoid Coil Resistance
5.5 A9 (20 b0C)
Solenoid Current Range
0.10 6 1.76 A
Supply Voltage
24 V DC
Viscosity Range
15 380 mm b2/s
1620 Old Apex Road
Shipping & Payment Options
