Bosch Rexroth | ZDRE10VP4X-1X250YMG24-8Z4M
ZDRE10VP4X-1X/250YMG24-8Z4M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The ZDRE10VP4X-1X/250YMG24-8Z4M valve is manufactured by Bosch Rexroth and belongs to the ZDRE Proportional Control Valves series, where it serves to reduce and regulate system pressure in automated hydraulic circuits. It functions as a proportional pressure-reducing 3-way unit, permitting continuous pressure adjustment based on the input current. Actuation is pilot-operated so the main spool follows a smaller pilot stage for precise modulation. The sandwich plate design lets the valve be stacked between subplates without extra piping, and the ISO 4401 / DIN 24340-A mounting interface standardizes its installation points. A nominal size of 10 sets the hardware envelope and flow paths, while component series 2X identifies the current build level. Pilot oil is supplied from port P2 with an external drain on port Y to keep pilot flow clean and stable. Mineral oil types HL or HLP according to DIN 51524 are the approved operating fluids, and the valve can handle up to 80 l/min to match medium-capacity systems.
The inlet side withstands 315 bar, channels P2, A, B, and X tolerate 350 bar, and the tank port endures 250 bar, giving distinct limits for every passage in the circuit. Electrical control begins at a minimum solenoid current of 100 mA and rises linearly to a maximum of 1600 mA, defining the usable command window for proportional operation. A coil resistance of 5.5 Ω at 20 °C matches the MG24 solenoid, allowing predictable power dissipation across the full current range. The valve weighs 5.1 kg, so manifold supports must accommodate this mass during service. These pressure, electrical, and mechanical values combine to provide dependable modulation when the unit is integrated into mobile or stationary hydraulic machinery.
Technical Specifications
Actuation
Pilot-Operated
Coil Resistance (20 °c)
5.5 Ω
Component Series
2X
Design
Sandwich Plate
Hydraulic Fluid
Mineral Oil (HL, HLP) DIN 51524
Max Flow
80 l/min
Max Operating Pressure (p1)
315 bar
Max Operating Pressure (p2/a/b/x)
350 bar
Max Operating Pressure (t)
250 bar
Maximum Solenoid Current
1600 mA
Minimum Solenoid Current
100 mA
Mounting Interface
ISO 4401; DIN 24340-A
Nominal Size
10
Pilot Oil Supply
From P2, external drain (Y)
Valve Type
Proportional Pressure Reducing (3-Way)
Weight
5.1 kg
1620 Old Apex Road
Shipping & Payment Options
