Bosch Rexroth | ZDRE10VP2X-1X180LG24-25Z4M-8
ZDRE10VP2X-1X/180LG24-25Z4M-8
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The ZDRE10VP2X-1X/180LG24-25Z4M-8 valve is manufactured by Bosch Rexroth for the ZDRE Proportional Control Valves series. It meters hydraulic pressure proportionally to an electrical command, supporting automated clamping and motion functions. The nominal size 10 passage geometry defines the flow paths and suits medium-frame manifolds. A maximum flow rate of 80 l/min lets the unit supply actuators without excessive pressure drop. The inlet stage tolerates up to 315 bar, while ports A, B, and X withstand 350 bar to handle higher working loads. The tank port is limited to 250 bar so return lines remain within safe ratings. Hysteresis held within ±3 percent of the set pressure keeps response repeatable during cyclic operation. A continuous 100 percent duty cycle permits the solenoid to remain energized without thermal pauses, and a peak coil current of 1.6 A matches common servo-amplifiers.
Coil resistance measured at 5.5 Ω at 20 °C defines the electrical impedance the drive electronics must overcome to achieve full magnetic force. Wiring is completed through a DIN EN 175301-803 connector, providing a quick disconnect for service. When the mating plug is fitted, the enclosure attains IP65 protection, which shields internal parts from dust ingress and low-pressure water jets. The valve bolts to subplates using the ISO 4401-05-05-0-05 interface so designers can exchange components without redrilling patterns, and the DIN 24340-A10 porting arrangement aligns the pressure and return galleries consistently. NBR seal material isolates mineral-oil mediums and maintains leakage control over a wide temperature band. System cleanliness must reach ISO 4406 20/18/15 to protect the precision spool and extend service life. A mass of 5.1 kg influences manifold support requirements and determines how the assembly is handled during installation.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Coil Resistance (20°c)
5.5 Ω
Duty Cycle
100%
Electrical Connector
DIN EN 175301-803
Hysteresis
±3% of max set pressure
Max Flow Rate
80 l/min
Max Operating Pressure (p1)
315 bar
Max Operating Pressure (p2/a/b/x)
350 bar
Max Operating Pressure (t)
250 bar
Mounting Interface
ISO 4401-05-05-0-05
Nominal Size
10
Porting Pattern
DIN 24340-A10
Protection Class
IP65 (with mating connector)
Seal Material
NBR
Solenoid Current, Max
1.6 A
Weight
5.1 kg
1620 Old Apex Road
Shipping & Payment Options
