Bosch Rexroth | ZDRE10VP2
ZDRE10VP2
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The ZDRE10VP2 proportional pressure reducing valve is produced by Bosch Rexroth within the ZDRE Proportional Control Valves series. It serves to modulate hydraulic pressure in automation systems by translating a controlled solenoid current into a precise downstream setting. The nominal size is 10, so the flow passages match standard CETOP 5 cavities for mid-range circuits. A sandwich plate mounting style allows the valve to be stacked between other subplates without external piping, while the ISO 4401-05-05-0-05 porting pattern keeps interface dimensions consistent across manifolds. The device can accept inlet pressures up to 315 bar and pass up to 80 l/min, enabling reduction circuits on medium-capacity actuators. Channel P1 is dedicated to pressure reduction, ensuring that only the primary supply is regulated. The coil resistance of 5.5 Ω at 20 °C and a minimum solenoid current of 100 mA define the electrical drive needed to start modulation, and a continuous duty cycle of 100 % permits the coil to remain energized throughout the machine cycle without overheating.
This valve belongs to component series 2X, indicating internal design updates compatible with the latest Rexroth drive electronics. Electrical connection is made through a DIN EN 175301-803 plug, simplifying field wiring and allowing quick replacement. When the mating connector is secured, the enclosure attains an IP65 protection rating, so dust ingress and low-pressure water jets do not affect operation. System oil must meet ISO 4406 cleanliness class 20/18/15 to minimize spool wear and sustain repeatability. Linearity is held within ±3.5 % of the maximum set pressure, and hysteresis stays inside ±3 %, which supports stable closed-loop control in positioning or clamping tasks. The assembled unit weighs 5.1 kg, light enough for manifold mounting without additional supports.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Coil Resistance (20°c)
5.5 Ω
Component Series
2X
Connector Standard
DIN EN 175301-803
Duty Cycle
100%
Hysteresis
±3% of Maximum Set Pressure
Linearity
±3.5% of Maximum Set Pressure
Maximum Flow
80 l/min
Maximum Pressure Setting
315 bar
Minimum Solenoid Current
100 mA
Mounting Style
Sandwich Plate
Nominal Size
10
Porting Pattern
ISO 4401-05-05-0-05
Pressure Reduction Channel
P1
Protection Rating
IP65 (with mated connector)
Weight
5.1 kg
1620 Old Apex Road
Shipping & Payment Options
