Bosch Rexroth | 4WRZ10E85-7X6EG24XEJETD3V
4WRZ10E85-7X/6EG24XEJET/D3V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRZ10E85-7X/6EG24XEJET/D3V proportional directional valve belongs to the WRZ Proportional Directional Valves series from Bosch Rexroth and is engineered to control actuator speed and direction in hydraulic automation loops. Its solenoid operates on a 24 V DC supply, and the coil presents 4.8 Ω at 20 °C, so a driver circuit can predict current draw accurately. Continuous current is limited to 1.5 A, protecting the winding from overload while the insulation can tolerate temperatures up to 150 °C. An IP65 enclosure shields the electrical section from dust and low-pressure water jets, allowing installation in typical plant environments. The unit follows the ISO 4401-05-05-0-94 mounting pattern, which fits common subplates without additional adapters. With a mass of 7.8 kg, routine replacement or service can be performed by a single technician using standard tools.
The hydraulic section passes up to 85 L/min at a 10 bar pressure drop, giving reliable flow capacity for medium-sized cylinders and motors. Main flow paths withstand 315 bar, matching high-pressure power units, and the internal pilot supply is rated to the same 315 bar so no external regulator is needed. Return oil leaves through port T, which must remain below 30 bar, while port Y is also limited to 30 bar to protect the pilot stage. Both pilot supply and drain are taken internally, reducing hose runs on the manifold. A ZDR 6 DP0-4X/40YM-W80 pressure-reducing cartridge is integrated to stabilize pilot pressure for consistent spool positioning. Fluids are sealed with FKM elastomers that resist common hydraulic oils and elevated temperatures.
Technical Specifications
Coil Resistance (20 C)
4.8 ohm
Electrical Supply Voltage
24 V DC
Max Coil Temperature
150 C
Max Current
1.5 A
Max Operating Pressure (main)
315 bar
Mounting Pattern
ISO 4401-05-05-0-94
Nominal Flow (10 Bar)
85 l/min
Pilot Oil Drain
Internal
Pilot Oil Supply
Internal
Pilot Supply Pressure Max (internal)
315 bar
Port Y Pressure Max
30 bar
Pressure Reducing Valve
ZDR 6 DP0-4X/40YM-W80
Return Pressure Port T (internal)
30 bar
Seal Material
FKM
Type Of Protection
IP65
Weight
7.8 kg
1620 Old Apex Road
Shipping & Payment Options
