1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG12N9DAL valve belongs to the WE Directional Spool Valves series produced by Bosch Rexroth for hydraulic automation, where it shifts flow between work ports under electrical command. Its high-power wet-pin solenoid with a detachable coil supplies strong magnetic force for reliable spool movement during continuous duty. The coil operates at a nominal 12 V DC so mobile and battery-powered machines can drive the valve without voltage conversion. A rated current of 2.5 A defines the electrical load the control circuit must provide. The DAL central 1/2-14 NPT electrical connection presents a single entry point that simplifies conduit sealing on compact manifolds. An integrated indicator light confirms energization so maintenance staff can verify actuation at a glance. A maximum switch-off overvoltage of 500 V limits the reverse voltage created when the coil is de-energized, protecting driver electronics. The manifold interface follows the ISO 4401-03-02-0-05 porting pattern, allowing the valve to mount on standard subplates without re-machining, and the mounting face is finished to a surface roughness not exceeding Rzmax 4 micrometers to maintain gasket integrity and prevent external leakage.
The enclosure carries an IP65 ingress rating so internal components resist dust and low-pressure water jets. The valve can be installed in any orientation, easing layout inside confined power units. A concealed N9 manual override lets operators shift the spool during commissioning without exposing the control button to accidental bumps. Flow capacity reaches 80 l/min in direct-current service, making the unit suitable for medium-size actuators. Ports P, A, and B tolerate working pressures up to 350 bar. The tank port is limited to 210 bar so return plumbing must be sized accordingly. To prevent contamination-related wear, the hydraulic fluid must meet ISO 4406 class 20/18/15 cleanliness. A calculated mean time to dangerous failure of 300 years supports long service intervals in safety-critical circuits.
Electrical Connection
DAL (Central, 1/2-14 NPT)
Fluid Cleanliness
ISO 4406 Class 20/18/15
Indicator Light
Included
Ingress Protection
IP65
Installation Position
Any
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (dc)
210 bar
Mttfd
300 years
Nominal Voltage
12 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current @12 V
2.5 A
Solenoid Type
High-Power Wet-Pin, Detachable Coil
Surface Roughness (mounting)
Rzmax 4 µm
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business