Bosch Rexroth | SYDFEE-2X100R-PKC62N00-0000-A0A0VX2
SYDFEE-2X/100R-PKC62N00-0000-A0A0VX2
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SYDFEE-2X/100R-PKC62N00-0000-A0A0VX2 hydraulic control unit is produced by Bosch Rexroth within the SYD Hydraulic Control Systems series. It regulates pump displacement for closed-loop motion circuits in automated machinery. The direction of rotation is clockwise, allowing direct coupling to right-hand driven shafts. A displacement of 100 cm³ specifies the fluid volume moved per revolution and determines flow capacity at each speed. The controller maintains operation down to a minimum speed of 250 rpm for low-flow demands and up to 2000 rpm at maximum displacement for rapid cycles. At 1500 rpm it delivers 150 l/min, giving a reference point for sizing return lines and reservoirs, while the absolute flow ceiling of 200 l/min supports short-term peak loads. The assembly withstands a maximum operating pressure of 280 bar, aligning with common industrial hydraulic standards. An IP65 protection class shields the electronics from dust ingress and water jets, allowing installation on mobile or factory equipment without an extra enclosure.
For transmitted power, the system can supply 70 kW at 1500 rpm under 280 bar and reach a maximum of 93 kW when full pressure is sustained at rated speed, ensuring reserve capability for transient demand. A peak torque of 445 Nm is available at 280 bar, which defines the mechanical shaft rating for coupling selection. The electronic module is powered from a nominal 24 VDC supply; functional tolerance permits operation from 21 V to 35 V so the unit stays active during battery sag or charging. Control circuits draw a steady 0.6 A during normal regulation and may rise to 1.25 A when full actuation is required, information used to size fusing and wiring. These electrical limits, combined with the hydraulic ratings presented earlier, establish clear boundaries for integrating the SYDFEE-2X/100R-PKC62N00-0000-A0A0VX2 into automated hydraulic drives.
Technical Specifications
Direction Of Rotation
Clockwise (R)
Displacement
100 cm³
Flow At 1500 Rpm (vg Max)
150 l/min
Max Flow (at Vg Max)
200 l/min
Max Power (280 Bar, Nnom)
93 kW
Max Speed (at Vg Max)
2000 rpm
Max Torque (280 Bar)
445 Nm
Maximum Current (electronics)
1.25 A
Maximum Operating Pressure
280 bar
Minimum Speed
250 rpm
Power At 1500 Rpm (280 Bar)
70 kW
Protection Class
IP65
Rated Current (electronics)
0.6 A
Supply Voltage (nominal)
24 VDC
Supply Voltage Lower Limit
21 V
Supply Voltage Upper Limit
35 V
1620 Old Apex Road
Shipping & Payment Options
