Bosch Rexroth | SYDFEE-2X045R-PKC62N00-0000-AOBOVG3
SYDFEE-2X/045R-PKC62N00-0000-AOBOVG3
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SYDFEE-2X/045R-PKC62N00-0000-AOBOVG3 is produced by Bosch Rexroth for the SYD Hydraulic Control Systems series and acts as a variable-displacement source for hydraulic automation loops. It delivers 45 cm³ per revolution, and its clockwise rotation setting requires matching motor direction. Nominal flow reaches 117 l/min when the unit runs at full displacement, while a minimum speed of 250 rpm is needed to sustain internal lubrication. The assembly tolerates operating pressures up to 280 bar so cylinders and motors can develop high force. Mineral oil in the HL or HLP class is specified as the working fluid to maintain seal compatibility. Control electronics operate from a 24 V DC supply, and peak coil demand is limited to 1.25 A to fit common power budgets.
The housing contains 1.0 l of oil that cushions pressure pulsations and removes heat from internal parts. Shaft power can reach 55 kW at nominal speed and 280 bar, with corresponding torque rising to 200 Nm, data that guides coupling and motor selection. A rotor inertia of 0.0033 kg·m² influences acceleration times in servo-controlled cycles. An IP65 enclosure prevents dust ingress and withstands low-pressure water jets encountered on factory floors. During continuous duty the solenoid draws 0.6 A, supporting stable control without thermal overload. The assembly weighs 26 kg without a through-drive section, enabling manual handling with basic lifting devices.
Technical Specifications
Displacement
45 cm³
Housing Oil Volume
1.0 l
Hydraulic Fluid
Mineral Oil (HL/HLP)
Max Current
1.25 A
Max Flow (nnom, Vgmax)
117 l/min
Max Operating Pressure
280 bar
Max Power (nnom, 280 Bar)
55 kW
Max Torque (280 Bar)
200 Nm
Minimum Speed
250 rpm
Moment Of Inertia
0.0033 kgm²
Protection Class
IP65
Rated Current
0.6 A
Rotation Direction
Clockwise (R)
Supply Voltage
24 VDC
Weight Without Through-drive
26 kg
1620 Old Apex Road
Shipping & Payment Options
