Bosch Rexroth | SYDFEE-2X028R-PKC62N00-0000-A0A0VX2
SYDFEE-2X/028R-PKC62N00-0000-A0A0VX2
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SYDFEE-2X/028R-PKC62N00-0000-A0A0VX2 is a hydraulic control unit in the SYD Hydraulic Control Systems series manufactured by Bosch Rexroth. It meters oil flow for servo-actuated cylinders and motors in automated machinery. The fixed displacement of 28 cm³ defines the volume delivered per revolution and establishes baseline pump output. When the shaft turns at 1500 rpm with the displacement set to maximum, the unit supplies a flow of 42 l/min, while operation at the nominal speed increases delivery to 84 l/min to satisfy higher cycle rates. A maximum operating pressure of 280 bar enables the assembly to drive high-force actuators, and at this pressure the package can transmit 39 kW of hydraulic power for energy-dense motion control. The corresponding output torque reaches 125 Nm, giving adequate start-up force for heavy loads. Continuous rotation is permitted up to 3000 rpm at full displacement, and stable speed regulation begins at 250 rpm to support slow positioning tasks.
For mechanical durability the housing tolerates an axial shaft load of 1000 N and a radial load of 1200 N, allowing direct pulley or gear coupling without additional bearings. Electrical integration is straightforward because the drive electronics operate from a 24 VDC supply; under dynamic conditions the current may peak at 1.25 A, while steady-state control typically draws 0.6 A. The rotating group carries a moment of inertia of 0.0017 kg·m², assisting quick speed changes in closed-loop systems. Overall mass without a through-drive is 20.5 kg, light enough for panel mounting inside compact power units. An IP65 protection class seals the enclosure against dust and low-pressure jets of water, so installation on factory floors does not require additional covers.
Technical Specifications
Displacement
28 cm³
Mass (without Through-drive)
20.5 kg
Max Axial Force
1000 N
Max Current
1.25 A
Max Flow (1500 Rpm, Vg Max)
42 l/min
Max Flow (nominal Speed, Vg Max)
84 l/min
Max Operating Pressure
280 bar
Max Power At Δp=280 Bar
39 kW
Max Radial Force
1200 N
Max Speed At Vg Max
3000 rpm
Max Torque At Δp=280 Bar
125 Nm
Minimum Speed
250 rpm
Moment Of Inertia
0.0017 kg·m²
Operating Voltage
24 VDC
Protection Class
IP65
Rated Current
0.6 A
1620 Old Apex Road
Shipping & Payment Options
