Bosch Rexroth | SYDFE1-2X028L-PKC62N00-0000-A0X0XXX
SYDFE1-2X/028L-PKC62N00-0000-A0X0XXX
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SYDFE1-2X/028L-PKC62N00-0000-A0X0XXX belongs to the SYD Hydraulic Control Systems series from Bosch Rexroth and is applied in hydraulic automation where variable flow is required. Its axial piston variable displacement pump design lets an operator modulate output volume to match load demand. A displacement of 28 cm³ per revolution establishes the basic flow rate available for actuators. Maximum operating pressure reaches 280 bar so the unit can supply force to medium-pressure circuits. External analog electronics govern the control system, allowing proportional command signals from remote controllers. A standard control spool version provides baseline metering behavior without specialized lap geometry. Pilot oil is taken internally, reducing external plumbing and simplifying installation. Compatibility with mineral oil grades HL or HLP allows use with common industrial hydraulic fluids.
The pump is intended for counterclockwise rotation, aligning with left-hand drive arrangements on many power units. A 22 mm drive shaft transmits torque from the prime mover, and the cylindrical shaft with a DIN 6885 key ensures positive mechanical engagement with couplings. Solenoids are mounted radial to the pump axis to keep electrical actuators accessible while minimizing axial length. There is no through-drive (code N00), so the housing cannot mount additional pumps in tandem. Working ports are executed as opposite SAE connections with metric threads to support standardized hose fittings on compact manifolds. A preload valve is not installed, meaning pressure buildup and unloading must be handled by external circuit components.
Technical Specifications
Control Spool Version
Standard
Control System Type
External Analog Electronics
Direction Of Rotation
Counterclockwise
Displacement
28 cm3
Drive Shaft Diameter
22 mm
Drive Shaft Type
Cylindrical With Key (DIN 6885)
Hydraulic Fluid
Mineral Oil (HL/HLP)
Max Operating Pressure
280 bar
Pilot Oil Supply
Internal (Standard)
Preload Valve
Not Installed
Pump Type
Axial Piston Variable Displacement
Solenoid Orientation
Radial To Pump Axis
Through-drive
None (N00)
Working Ports Type
SAE, Opposite, Metric Threads
1620 Old Apex Road
Shipping & Payment Options
